Question about 2003 Cadillac Escalade

1 Answer

2003 cadillac escalade cranking over but not starting, tried plugging in scanner to get codes but no power to plug in.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am not sure why your truck isn't cranking; however, I have had the same problem with no power to the diagnosis connector. There is a fuse box under your hood, look for the cigarette lighter fuse. I'll bet it is blown. Replace the fuse and you will have power to the port.

Posted on May 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have replace fuel punk and main gure vox on my 2003 Dadila Eskalada 6.0 all where drive fusses are good no power going to fuel pump Whats my problem turns over but wont start not getting gas


2002-2006 Cadillac Escalade fuel filter replacement ...

? 8:03
https://www.youtube.com/watch?v=7RQ8u_vwZmE
Aug 14, 2014 - Uploaded by NutzAboutBolts
2002 Cadillac Escalade fuel filter remove and install. ... The interactive transcript could not be loaded. ... 2003-2007 Honda Accord Auto Tensioner remove and install - Duration: 6:36. ...Spark plug replacement 2001 - 2007 GMC 2500HD 6.0L 5.3L tune up Install Remove Replace How to - Duration: 7:30.Missing: dadila ‎eskalada

Jan 23, 2016 | Cars & Trucks

1 Answer

02 escalade wont start now code p1631 on scanner how do i fix


This is the theft deterrent system --- the body control module (BCM) and power train control module (PCM) have conflicting codes. The codes between the two must match. If you've replaced one, you need to 're-learn' them so the codes match.

Nov 22, 2013 | 2002 Cadillac Escalade

1 Answer

While pulling a small utility trailer with our 2008 Cadillac escalade we get off the freeway and start slowing down and suddenly, without warning the engine cuts out. When we try starting it again it...


1st check the spark plugs & wires
2nd check the alternator or starter
3nd check all sensors (crank shaft sensor, 02,)
finally the "brain" of the vehicle may be going out...

Jan 05, 2012 | 2008 Cadillac Escalade Esv

1 Answer

The radio on my cadillac escalade 2000 suddenly didnt work. Is there a code for it? If so, how can I find it


2000 Escalad. inside of center console. ther is a outlet to plug a harnes. What do you plug in ther?

Jun 09, 2010 | 2000 Cadillac Escalade

2 Answers

04 escalade does nothing when i plug scanner on. its like no power thruogh the wires to the actual plug


Check your fuses...the fuse for the OBII is probaly blowed...Or see if the scanner works in another car, to make sure the internal battery on the scanner is good..

Jan 19, 2010 | 2004 Cadillac Escalade

1 Answer

I have a 2000 Cadillac Escalade i have to crank on it for a time and then it will finaly start what do you think. It is like it is not gitting gas


Either plugs or injectors. Probably injectors, do you smell alot of gas like it was flooded when it finally starts? If not try the old injector cleaners in a can maybe you will get lucky

Nov 23, 2009 | Cadillac Escalade Cars & Trucks

1 Answer

Oil drain plug location and oil filter location 03 cadillac escal


The oil drain plug is close to the radiator area underneath the Escalade. And the oil filter is a standard screw on type which is clearly visable from underneath.

Jun 13, 2009 | 2003 Cadillac Escalade

1 Answer

2003 Escalade won't start


test the voltage on both the batterys positive and the jumping post positive while cranking, that will tell you how much power is being drawn and where you maybe loosing it, i would replace any battery that drops below 11volts

Jan 25, 2009 | 2003 Cadillac Escalade

Not finding what you are looking for?
2003 Cadillac Escalade Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...