Question about 1993 Audi 90

1 Answer

Serpentine belt where on line can i find a diagram showing how the serpentine belt goes on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You can buy the 1993 AUDI 90 CD from Bently Publishing for about $99.  I have it and I've used it.  It has diagrams and instructions.
Erik

Posted on Jan 29, 2009

6 Suggested Answers

  • 13 Answers

SOURCE: serpentine belt diagram:

if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach

7f8b868.gif

Posted on Jun 16, 2008

  • 2 Answers

SOURCE: serpentine belt diagram:

The belt routing diagram is located on the top radiator cross member by the hood latch. You should see it when you open the hood. If it is not there, all Chrysler, Dodge, and Plymouth minivans, from 1993 to at least 1999, used the same 3.3L engine setup, so find someone with one and look for the diagram where I described.

Posted on Jul 18, 2008

dsacco86
  • 1077 Answers

SOURCE: SERPENTINE BELT DIAGRAM 4.3L 1990 S-10 BLAZER 4WD w/AC

Here ya go:
202954_43belt_1.jpg

Posted on Mar 24, 2009

  • 11 Answers

SOURCE: mercury sable 2002 serpentine belt change

There are also two serpentine belt types for the 2002 sable. The S and U type engine. Take the old belt with you the the parts store. As for the diagram, I googled it under images and about a dozen correct ones came up. Remember the 2002 sable is the same as the 2002 Tarus.

Posted on May 02, 2009

jturcotte
  • 6880 Answers

SOURCE: I need a serpentine belt routing diagram for a

from autozone.com

3f85266.gif

Posted on Sep 12, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for a serpentine belt on a 81 f150. it has a 351w .


these don`t have a serpentine belt system. the have a V belt system. if you line up the pulleys then you will know how the belt is to run. if you can`t figure it out try the library for a book that will show the belt routing.

Apr 12, 2015 | Cars & Trucks

1 Answer

How to put on serpentine belt


There should be a diagram showing you how it goes on somewhere under the hood usually on the fan cowl

Apr 24, 2013 | Cars & Trucks

1 Answer

Can u show me how to install a serpin belt on a 1998 ford escort


Here's a website with your diagram and instructions. The serpentine belt is also called a drive belt.
Go to 2carpros.com. Click on INFORMATION on the right side. Scroll down to serpentine and timing belt diagrams. Then enter your car's description. The serpentine belt diagram is below the timing belt information.
(Someday I'll have my son show me how to post up links. lol)

Nov 17, 2011 | Cars & Trucks

1 Answer

How to change serpentine belt?


Under the hood you will see a diagram that shows the routing of the belt, remember where that is you will need to refer to it! Now not knowing what engine you have I will attempt to help you, most engines with a serpentine belt have whats called and idler pulley this is a pulley that's only job is to put tension on the serpentine belt, it is sometimes identified in the diagram I spoke of earlier, if not look for a pulley that goes to nothing, in other words you'll see your power steering pump, your water pump. your a/c pump etc. once you identify it you need to put a wrench on it and pull or push it and you will see it relive tension on the belt and wa la you simply apply enough tension on it until the belt is loose enough to remove then you put the new belt on by lining it up on all the acesories and relieving the tension installing the belt and letting it loose so it can apply the tension! Use the diagram to make sure you have the belt on correctly. If you have any more questions just ask!

Feb 12, 2010 | 1993 Jeep Grand Cherokee

1 Answer

Please show diagram for replacing serpentine belt


How do you bypass the serpentine belt from the a/c compressor the reg belt is 85in

Oct 25, 2009 | 1999 Ford Taurus

1 Answer

Need diagram to install serpentine belt


Look at the pullies to see if they are smooth or if they have lines on then. The back side of the belt the ( smooth side) goes against the smooth pullies.The side with lines on it goes to the other pullies. Some vehicles have the diagran in the engine compartment. Under the hood or by the top of the radiater.

May 10, 2009 | 2001 Isuzu Rodeo

2 Answers

Diagram of how serpentine belt goes. Last belt had one on pkg.


for the most part there is a diagram under your hood showing you how the new belt goes on try this website to see if they have your car listed its www.autozone.com you can also ask the part store where you buy the new belt from for a diagram

May 02, 2009 | 1992 Mercury Grand Marquis

1 Answer

Belt diagram


for the most part there is a diagram under the hood showing you how the belt goes back on you can try www.autozone.com to see if they have your car listed but this is what i do i draw a diagram of the old belt before i take it off and that way i know how the new one goes on.

Apr 18, 2009 | 2001 Ford Focus

1 Answer

Serpentine belt


When you open the hood there is a diagram on a sticker that shows exactly how to do this. Should be on the front lip or the side of the engine compartment. You have to make sure you get it lined back up right and remember to check it once the engine has been started and make sure it running on all the pulleys correctly.

Here is a good diagram that should be able to help in case your sticker was damaged or removed. Good luck!

http://www.2carpros.com/car_repair_information/tec_info/1999/pontiac/grand_am/1999_pontiac_grand%20am_drive_belt_routing_diagram.htm

Nov 09, 2008 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
1993 Audi 90 Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13573 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...