Question about 1994 Ford Ranger Supercab
Wants to stall not all the time battery drops low when it happens
It runs like a champ when its warm because the gas is expanding try new spark plugs and wires
Posted on Dec 02, 2009
Battery will drop low when engine is stalling because the charging system is equal to the number of rotations on the motor. therefore less rotations less charging
Posted on Dec 28, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 20, 2016 | 1994 Ford Ranger Supercab
Jan 27, 2016 | 2003 Ford Ranger Regular Cab
Dec 19, 2015 | 1988 Ford Ranger
Sep 20, 2012 | 1994 Ford Ranger Supercab
Sep 03, 2012 | 1994 Ford Ranger Supercab
To correct this problem Buy a can of throttle valve cleaner (it is made by CRC) from the local auto parts store, NEVER USE CARB CLEANING SPRAY, IT DESTROYS THE ANTI-STICK TEFLON COATING, spray it into the air intake through the throttle body of the engine until you have used about half the can, you will need to hold the idle up while you do this, it will try to stall, after this shut the engine down and disconnect the Negative (-) battery cable for 5 minutes. The intake is now clean, if you continue to have the idle speed control problems you may need to seek the help of a professional.
Jan 29, 2012 | 2002 Ford Ranger Regular Cab
Please see my tip at http://www.fixya.com/cars/r6234839-doesn_t_heater_or_air_conditioner_blow . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.
Oct 12, 2010 | 1994 Ford Ranger Supercab
Oct 10, 2009 | 1994 Ford Ranger Supercab
Mar 06, 2009 | 2003 Ford Ranger Regular Cab
269 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: