THE FIRING ORDER FOR A 1992 GEO METRO

i know the firing order for my 1991 geo storm is 1-3-4-2 but where ...

https://answers.yahoo.com/question/index?qid=20100724161217AAxsz6L

1. Cached
2. Similar

Jul 24, 2010 - I know the firing order for my 1991 geo storm is 1-3-4-2 but where on the distributor does it start? ... the guy told me that i had the firing order wrong and now my car keeps cutting out when i go to ... Holey Mufflers · 6 years ago.

Geo Tracker Plug Firing Order - My Geo Tracker

www.rlb.50megs.com/trkfiringorder.html

1. Cached
2. Similar

FIRING ORDER. Notice the rotation of the distributors for each engine type. Why they are different is odd itself. . . The blackened areas designate the the numner ...

Firing Order - Geo Metro Forum

geometroforum.com > Geo Metro Forum > Metro Tech > Engine Tech & Diagnostics

1. Cached
2. Similar

May 3, 2010 - 15 posts - ‎2 authors I looked up on the internet the firing order 1-3-2 counter clockwise but no ... the best explanation of both types of timing I know of starting about posts #6 ... Location: College Park, MD; Year/Make/Model: 1991 Pontiac Firefly ... 91 geo storm1 6 firing order Google Search

1,3,2

when you re-installed the timing belt did you make sure the timing marks were lined up properly.also the timing specs should hopefully be on a decal under the hood somewhere.if not i think its around 6 degrees,it`s been awhile.

1997 Geo Metro 1.3 liter L4 VIN "9"




Hope helps. (remember rated and comment this).

1,3,4,2 is the fireing order. I got the answer from the haynes manual for the car.

I think you're asking which cylinder is the #1 cylinder used to set the timing. The answer to that is the one closest to the front, where the belts are, passenger side, or the left one as you look at it from the front of the car.

3cylinder is 132
4 cylinder is 1342
distibutor turns counter clock wise.

firing order is wrong, and rings are bad on the weak cylinder or a burnt valve

Sounds like your timing belt has slipped or broken, bad news is it is a interference engine, talking rebuild if that is the problem.

how to put the timing chain back on the engin. what i need too know is how too set the point up?