- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I've uploaded a diagram that gives you the firing order for the 96 Chevy Cheyenne. The best way to find out which is number one in the firing order is to following the spark plug on the engine block back to the distributor cap. Number 1 is on the right side, closest to the front of the engine. Best of luck!
To answer that question you need to follow the plug wire from the # 1 cylinder to the cap. #1 cylinder is the first cylinder located at the far from of the drivers side portion of the engine. (left side) The cylinders are numbered even and odd, so 1,3,5 left and 2,4,6 right. The firing order is also located on the intake manifold directly in front of the distributor.
THE FIRING ORDER IS AS FOLLOWS : 1-6-5-4-3-2.
CYLINDER NUMBERS (front-to-rear) :
LEFT (driver side) 1-3-5
RIGHT (passenger side) 2-4-6
To set ignition timing, ensure that engine is at operating temperature, (190 degrees or above), bypass EST (electronic spark timing) by unplugging the single tan wire with a black stripe from the distributor. Ignition timing should be set at 0 degrees or TDC (top dead center). If not, loosen distributor hold down bolt and adjust, then retighten.
The firing order for a Chevy s10 depends on which engine you have.
1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise.
2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise.
4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.