Question about 1998 GMC Jimmy

1 Answer

All of the running lights work except the headlights 1998 jimmy

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Just try this. I had the same problem here a while back. try clicking on the high beam lever. mine went bad and was stuck in between high and low beam and would not come unstuck. and it caused the headlights not to work...

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 dodge Dakotas headlights went out so I changed the switch and now the headlights work but the taillights don't work. Every other light works except the running lights. Also the light that show


The black wire with yellow tracer is voltage for tail lamps. With the headlamp switch on, any voltage on that wire? Use a test light to check. Also check fuse 14--15amp.

Dec 11, 2014 | 1998 Dodge Dakota

1 Answer

Where is the light relay on 97 jimmy


There is a headlight relay on 1998 models, but not 1997.
And if you have daytime running lights there is a relay for that.
But none of that would affect the dash lights.
So my vote is for the problem being in the actual headlight switch, or a wiring connection. The headlights, parking lights, and dash lights are all on different circuits and fuses. But they all go thru the switch.

Feb 10, 2013 | 1997 GMC Jimmy

2 Answers

Where is the headlight relay in the 1998 jimmy? Low beams won't come onat night everything else does. high beams work


There is a headlight relay in the engine compartment fuse box, but its after the headlight switch and before the dimmer switch, so it powers both high and low beam circuits.
I would check the dimmer switch.

Dec 12, 2012 | 1998 GMC Jimmy

1 Answer

1998 gmc jimmy blowing brake light fuses, and headlights are not working corectly when the headlight switch is off, and its bright daylight outside.


The brake lamp fuse is blowing due to short to ground.Chances are you have a faulty bulb filament crossing over to another filament inside it.Remove the an inspect closely for a loose filament by lightly tapping on each of them.

Oct 08, 2010 | 1998 GMC Jimmy

1 Answer

How to shot off the security system in a 2000 gmc jimmy


Remove the cover off of your ignition switch. On the top there is a small wire connector that, once the truck is running, should be disconnected. This will turn on the 'SECURITY' light. All will be better, except the security light will be on at all times, much cheaper than replacing the ignition switch, however

May 14, 2010 | 1998 GMC Jimmy

1 Answer

Preventing the headlights from automatically coming on


Pull the DRL fuse. DRL=Day time Running Lamps. That will disable it completely and lights will only come on with your switch. Want to keep the lights on automatic just not when started? I don't know.

Oct 12, 2009 | 1998 GMC Jimmy

1 Answer

Headlights don't work


i check for blown fuse if ok most likely head light switch.

Sep 17, 2009 | 1998 Ford F250 SuperCab

Not finding what you are looking for?
1998 GMC Jimmy Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...