Question about 1988 Mitsubishi Starion

2 Answers

My 1987 chrysler conquest tsi floods the engine and won't start

The engine floods so bad it goes into the turbo/exhaust,it has spark installed new plugs started for a second then died again flooded again the turbo/exhaust again.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Your best solution wont work because it is an 88 they can only scan '96 and newer when OBD II came out so know what you are talking about before you post
those cars are known for fuelinjection probs. your best bet is to first get your self a fuel pressure regulator and Gauge to determin how much fuel you are pushung and get it tuned up by some one who knows what they are doing because tuning will make or break a turbo car

Posted on Feb 26, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 319 Answers

Do you know if you are pumping in the correct amount of gas. Is the pump going bad and pumping to much. Also check your throtlebody. If you take the vehicle down to a auto part store and have them run it on there computer (for free) they can tell you if any of the sensors are going bad or if some of the basic things have goine wrong.

tepfy

Posted on Dec 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil has flooded into the turbo and now will or start


If oil has flooded the turbo the chances are it has also fouled the spark plugs and some will have found its way into the exhaust, fouling the oxygen sensors and cat.

The first task will be to discover where the oil came from and carry out necessary repairs..
Overfull is a possibility, blocked engine breather is another. Abnormally high oil pressure due to a stuck relief valve, blocked turbo drain and/or a failed turbo oil seal are a few other possibilities.

Once the main fault has been cured it will be time to begin discovering how much damage has been done and to get the engine started.

May 15, 2016 | Cars & Trucks

2 Answers

I have a 1987 chrysler conquest tsi and fuel pump only runs when key is on start not on run but pump fuel lines not hook only power wires to pump is this how it works?


What does it do with the lines hooked up ? Most fuel injected vehicles need an RPM signal to let the computer know the engine is running to let power continue to the pump .

Feb 04, 2016 | Chrysler Cars & Trucks

1 Answer

I have a 1987 chrysler conquest tsi and have fuel problem my fuel pump only runs when i crank car over once i done cranking over fuel pump stop is this right


When you turn the key the pump runs till it pressurises the system you then crank over the engine fuel gets used pump starts again to keep up fuel pressure and stops when fuel is not being used

Feb 04, 2016 | Chrysler Cars & Trucks

1 Answer

88 dodge conquest tsi no start has spark and has fuel coming out of the injectors


,Use caburator cleaner and spray down the throttle body and put the air duct back on if this start up and then dies your fuel pump is the issue, If you dont have spark and want to test for spark take the lead spark wire from the ignition coil let it hang 1/4 from body ground and have some one crank it if you dont have spark replace the sensor in the distributor.(optic sensor its hall effect). if you have spark and fuel. note the postion of the distributor and move it foward. if it wants to start and cant check for a slipped timing belt,by the way Plymoth made the conquest TSI

Feb 26, 2012 | Chrysler Conquest Cars & Trucks

1 Answer

Have a 88 conquest TSI. Car idles rough when started, and roughness is noticable up to 2500 rpms when trying to maintain a certain speed. If accelerating, it's not noticable, and if the rpms are above...


i am having the same problem i think its due to ground problem or iac vaulve, look to see if the ground to the engine is right and see if the iac vaulve is good, also ur map sensor might have to much volt, and ur tps as well. good look friend God bless.

Aug 10, 2010 | 1987 Chrysler Conquest

1 Answer

I have a 1989 chrysler conquest and dont seem to have a strong vacuum comming from the carbeurator?


Suggest lots of possibilities...I assume it is NOT a TSi... so no Turbo.
If all vacuum lines are attached and in good shape, then you can have a back pressure issue, preventing the flow of burnt gas out of the engine, and therefore a low vacuum.
If you find that the Cat. converter is clogged (strong possibility...) the you can buy one...

http://www.carpartswholesale.com/cpw/chrysler~conquest~parts.html

Chrysler Conquest Catalytic Converter inv-dots.gif Notes : UNIVERSAL, 4 Cyl, 2.6L,CENTER UNIT Part # : CPWCC-70316 OEM # : Fit : 1987-1989 Chrysler Conquest (87-89)

Nov 23, 2009 | 1989 Chrysler Conquest

2 Answers

1991 eagle talon tsi sputter and cloud of smoke when BOV goes off from exhaust help please !!!


your piston rings have gone try taking spark plug out putting little oil in see how fast it comes out if it drains need new rings

Sep 14, 2009 | 1991 Eagle Talon

1 Answer

I have an orig 60K mile 1988 chrysler conquest tsi automatic that for some reason shifts extremely hard (its either the shifting or the turbo is kicking in to early) im not sure. and there is oil in the...


First thing I'd do is have transmission fluid & filter change done and add only autopar transmission fluid to it, ATF4. Get them or you to make sure they lube all linkages (especially throttle valve cable area, well as some can stick over time & cause problems like your describing. Secondly, cycle your key from off to on, (not start, just to on) back off, back on, back off, back on & leave it on & count flashes from check engine light. It will be 2 digit number but small pause in between, for example: 3 quick flashes, then a pause, then 3 more, will be code 33. 2 quick flashes, pause, 5 more flashes is code 25. when you get 5 flashes, pause, 5 more, thats code 55 which means end of message. Get back to us with results for more info on what to do. These should point everybody in right direction for any trouble your having.

Aug 09, 2009 | 1988 Chrysler Conquest

1 Answer

Vacuum hose connection for 1987 chrysler conquest


if you have the 2.6 turbo I have a vacuum diagram for that car or I could take a pic of mine so you can see what goes wear

Aug 05, 2008 | 1987 Chrysler Conquest

2 Answers

Chrysler conquest turbo charged


I'd almost forgot about that car!!! It was a great little sports coupe that had it's platform based on the Mitsubishi Starion/.Gallant chassis and as far as I know all had 2.6 turbo inter-cooled engines. It was the precursor to the Eclipse which was more of a joint venture with Chrysler.

May 15, 2008 | 1984 Dodge Conquest

Not finding what you are looking for?
Cars & Trucks Logo

595 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...