Question about 1995 Eagle Talon

2 Answers

Instrument cluster won't work

I have no turn signals, no odometer reading, no spedometer reading. I checked all fuses and they are fine. What can the problem be?

Posted by on

  • 1 more comment 
  • teamchaotic Dec 08, 2008

    my turn signals work...the only thing that doesnt work on mine is rpm and oil pressure

  • teamchaotic Dec 08, 2008

    my turn signals work my gauges for rpm and oil pressure dotn work

  • Anonymous Apr 14, 2009

    My speedometer doesn't work, and my dash lights wont work, and neither will my parking lights

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Maybe is the ground in your stereo

Posted on Sep 12, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 96 Answers

Electronic control module on the cluster is bad.

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have 1999 Dodge stratus all the gauges stopped working and odometer reads -no bus- a/c compressor stop working to, they all stopped at the same time.


I'd have to check voltage and ground for the instrument cluster. I noticed one of the fuses for your instrument cluster goes hot with the key on, same thing for ac compressor. I'd have to voltage feed to and from ignition switch for applicable fuse. Check the ignition switch wiring connector. I can't rule out ignition switch itself, at the moment.
There could be other issues?
Ignition switch faults are common on some makes and models.
Instrument cluster wiring connector problems. Sometimes if you disconnect and reconnect the instrument cluster connector, it may start working again, also, cycling the instrument cluster connector may reset, if it starts working, well, it's working for now, may quit again.
Some instrument clusters may do a self test, don't know about yours?
Press and hold odometer reset button, turn key to run position release odometer reset button, watch the odometer. Your indicator lamps may turn on and off, the gages may cycle in small increments. The cluster will exit self test on its own.
You may have to check buss circuits.

Apr 27, 2016 | Dodge Cars & Trucks

1 Answer

Instrument cluster is not working.


The odometer "error" is usually a BCM (body control module) problem, not the instrument panel. All the electrical signals you have lost all go to the BCM before going to the instrument panel.
It could be a simple connector problem.

Apr 15, 2014 | 2002 Buick Rendezvous

1 Answer

2004 Chevy Trailblazer - instrument panel works fine except the digital odometer reading went out and does not display anything?


You will have to have the cluster repaired. If you are handy, you can take the cluster out yourself. There a number of vendors on Ebay who repair clusters.

Aug 27, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

I have a 2001 Buick Regal GS that the entire cluster is not working - the tachometer, speedometer, fuel level, odometer, etc. read at zero, although are lit up when the car is on. When I drive down the...


There should be a fuse marked cluster or gauges that could be blown.
The turn signals are on a separate circuit.
You could also have a problem with the wiring behind the cluster or the cluster itself.
A mechanic would check the fuse and then check for power and ground at the cluster. The gauges are grounded thru their sending units.

Jul 18, 2012 | 2001 Buick Regal

1 Answer

1998 nissan altima is there a fuse for the trip meter on the odometer


sorry but no. the odometer gets its signal fom the spedometer so if the spedometer works and the odometer does not then you will need to replace the spedometer assembly...good luck

Jan 07, 2012 | Cars & Trucks

1 Answer

2003 GMC Yukon XL All gauges on instrument panel stopped working. They all stopped at 0, including spedometer, rpms, fuel, oil, etc. The electrical odometer is still working. Is this a fuse problem or does...


Sounds as though u have experience the GM usual cluster failure. They go bad more often then probably any other vehicle. Gm has been replacing some under a goodwill warranty for some customers.

May 18, 2010 | 2003 GMC Yukon XL

2 Answers

2003 GMC Yukon XL All gauges on instrument panel stopped working. They all stopped at 0, including spedometer, rpms, fuel, oil, etc. The electrical odometer is still working. Is this a fuse problem or does...


If this is an intermittent problem,
remove the IPC 10A fuse in the fuse box under the hood,
not in the fuse panel by the driver side door,
for 5 minutes.
The electronics will reset.

Dec 10, 2009 | 2003 GMC Yukon XL

3 Answers

Speedometer, gas gauge, odometer, rpm gauge not working


My gas guage, speed odometer and tempiture does not work
The speed odometre is reading 9999999 what should i do

Jul 29, 2009 | 1998 Nissan Frontier

3 Answers

Odometer stopped working


IF YOUR SPEEDO IS WORKING THEN YOUR VSS IS OKAY, BAD VSS WILL STOP SPEEDO AND USALLY CAUSE HARD SHIFTING. NORMALLY ODO IS CONTROLLED BY SERVO MOTOR WHICH MAY HAVE WENT OUT. CHECK EBAY FOR REPAIR SERVICES OR SIMPLY GET A SALVAGE CLUSTER AND HAVE MILEAGE RESET

Jun 28, 2009 | 1998 Ford Mustang

Not finding what you are looking for?
1995 Eagle Talon Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Stewart Dibbs

Level 2 Expert

267 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...