How can I disable my 1996 Infiniti I30 alarm - J30 Infiniti Cars & Trucks

SOURCE: Timing chain on 2000 Infiniti I30

timming chain not belt . its a really big job i suggest the dealer.to much work and u need a lift to do the job!

SOURCE: catalytic converter question

you must have a duel exuast the #2 converter is on the right center of the vehicle underneath the floor pan.

SOURCE: oxygen sensors, knock sensor

it under intake goood luck

SOURCE: driver's visor 3 buttons what for and how do i use it

Those buttons are for you to be able to program your garage door opener so that you don't need to have to original clipped to your visor all the time. The procedure is this: 1) put the key in ignition in postition 2 (car not running) 
 
2) hold down both homelink buttons on the outsides of the homelink transmitter (to reset any existing codes) you might have to do it for 20-30 seconds. Red light on homelink will flash rapidly then let go. 
 3) Now, with the garage remote in one hand and hold the button on the homelink you want to program (keep holding homelink until it pulses, not a rapid flash, takes about 20 sec.) While it is pulsing, hold down the garage opener as close to the homeling button as possible while depressing door opener button also.
 
Shortly after doing this you will see the homelink start to flash rapidly (this means it is learning the code). 
 
-  let go of both buttons once it is flashing rapidly and 
 
4) go to motor of door opener and hit the learn button (a light should turn on)
 
5)return to the car a press the homelink button you programmed once, twice, or maybe up to three times until you see garage door open/close.

You may need to have someone help you with this procedure.

SOURCE: I have a 1996 Infiniti i30. How do I reset or

have code read then replace problem component or fix problem, light goes out on its own, or disconect ground from battery for 30 seconds reattach, light will come back though if problem is not adressed