Question about 1991 Peugeot 405

1 Answer

Cam timing whats the correct way to set cam timing on the 1993 405 peugeot ! as i can't find timing marks?????

Posted by on

  • 1 more comment 
  • belgerga Dec 08, 2008

    Gasoline engine 1.9cc D6?

  • James Raymond Williams
    James Raymond Williams May 11, 2010

    You will need to supply us with more information. Is the engine petrol or diesel and what cc is it. Also the engine number.

  • Anonymous Mar 15, 2014

    how to set or find the timing marks settings for a Peugeot 307 2l with 16 values

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 272 Answers

Firstly with this engine being identified as an interference engine, I will not accept any responsibility if your engine gets damaged. You are free to take or leave this advice and the responsibility will be entirely yours.

Engine codes: D2H, D6A, D6B, D6D, DDZ, DKZ, DFZ.
Covering years 1989 to 1997.

  • Turn the crankshaft in a clockwise direction to about 10.00 o'clock on the mark on the camshaft sprocket. Good tip here, apply tippex to the sprocket mark.
  • Now slowly continue to turn the crankshaft and with the timing pin feel for the locating hole behind the camshaft sprocket.
  • You will find the camshaft location hole at about 8.00 o'clock.
  • When you have located the the locating hole behind the camshaft sprocket, insert the timing pin.
  • Now insert the timing pin in the crankshaft pulley.
  • You will find the crankshaft pulley location hole behind the sprocket at about 10.30 o'clock.
  • When both timing pins are in their locating holes, the top and bottom of the engine is in-line.
  • This information is only to set the engine up and not to change the timing belt.
  • I would advise that on these engines you change the timing belts at 60,000 miles or every 3 years which ever comes first. If for any reason the timing belt gets contaminated, change the timing belt.
Take care.

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to set timing from scratch on 1993 Mercury Tracer 1.9L


On the pulley, they are marks that line up with a mark on the head. That is TDC for the cam. Then set the crank to 0 on the timing marks. Put the belt back on.

Nov 28, 2014 | Ford Cars & Trucks

1 Answer

I have a 1999 plymouth breeze and replaced water pump and timing belt due to pump locked up and all the teeth gone off belt now. 2.0 SOHC that after setting belt and timing correctly the car wont start...


In general, backfiring indicates the cam, crank and ignition are out of time or out of phase. The timing marks on the crank and cam just line up the timing of the cam and crank. The alignment of the spark with them has to be phased at the right time too. Check the manual for how to set the distributor timing after an engine repair

Nov 17, 2014 | Cars & Trucks

1 Answer

Timing belt snaped on fiat palio 16v how do i find the cam marks


There are special tools you need to lock the cams in the correct position. Without these it is near impossible to get the valve timing 100% right. These locking plates fit on the opposite ends of the cam boxes from the cam gears and belt by removing the blanks on that end.
I managed to borrow a set and set it up correctly. I then made my own marks on the cam gears for future reference.

timing-belt-snaped-fiat-palio-16v-find-qdbodrihfgbojyt0cxubj1mu-3-0.jpg

timing-belt-snaped-fiat-palio-16v-find-qdbodrihfgbojyt0cxubj1mu-3-1.jpg

Apr 09, 2014 | 2005 Fiat Palio Weekend

1 Answer

Timing marks on peugeot 307hdi


on the facing outer edge of the crank and cam pulleys you will find a small (0) dimple.these are the timing marks.....

Sep 09, 2010 | Peugeot 604 Cars & Trucks

1 Answer

I replaced my cam belt and i need to set the timing, can u please tell me where are the timing marks?


on the crank/cam pulleys (small dots)on the outer rim,clean off and mark with chalk.

Jun 17, 2010 | 2005 Peugeot 405

1 Answer

Set harmonic balancer to top dead centre,set cams to timing marks,engine will not start but turns over. Hyundai Terracan 2002


hi from uk assume you have renewed c/belt and balance shaft timing belt? if so? and sure your timing marks on cams and the c/shaftcog are correct ? the oil pump also correctly aligned with marks? and the balance shaft gear also has time marking ? want to run thro how and which marks you have aligned and at TDC No1 all belt/s have to be aligned ??

Dec 27, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

Timing marks on peugeot 1.9 tdi


there is a few ways of doing thes the easiest way being using locking pins
you bont have to go and buy a set of locking pins you can use 3 m8 (13mm headded) bolts and a 5mm allen key

there is a hole in the cam pully and 2 holes in the injection pump pully and 1 in the fly wheel

i suggest you lock the fly wheel up first
the hole is located under the starter motor on the front of the block
insert the 5mm allen key and get someone to turn the crank pully clockwise until allen key engages into the fly wheel

the hole in the cam should be at about 25 past
(if it is at 10 to then you neet to remove the pin from the fly wheel and turn the crank 1 full turn)

when the hole is inthe right place you can insert a m8 bolt and wind it in to the head

with this now lined up you should be able to fit the other 2 m8 bolts into the injector pump pully

with this now done your 1.9 tdi engine is timed up

Dec 03, 2009 | 1990 Peugeot 405

1 Answer

Timing problem 1985 peugeot j5 motorhome


YOU NEED TO MAKE SURE ALL YOUR TIMMING MARKS LINE UP SET THE CRANK PULLY ON TDC AND MAKE SURE ALL THE DOTS ON THE CAM AND PUMP GEARS LINE UP YOU ARE PROBABLY ONE TOOTH OUT SOME WARE

Sep 01, 2009 | 1989 Peugeot 405

3 Answers

1995 106 d peugeot cranck shaft timming marks on engine


I've uploaded a manual for 106 tud timing belt refitting:
http://www.gigasize.com/get.php?d=y1dnk2hbl8d
may be it can solve your problem

Sep 01, 2009 | 1991 Peugeot 405

1 Answer

Timing chain repair on peugeot 504 /setting the timing after repair


colud you see the mecanical manual of peugeot 404, in web site of club peugeot 404, version in french

Jul 29, 2008 | 1983 Peugeot 504

Not finding what you are looking for?
1991 Peugeot 405 Logo

541 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...