Question about 2004 Mitsubishi Endeavor

1 Answer

How do I replace the headlight in my 2005 mitsubishi lancer

I want to relace the headlight bulb on the passenger side. Do I have to remove the headlight assembly to do so?

Posted by on

  • swanprint Apr 20, 2009

    driver side headlight bulb

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 91 Answers

Hi. While looking into your question I came across another posting of the same question for a 2004 Mitsubishi Endeavor and I believe it could help you. I put it in a link below. The instruction are basically the same. I hope this helps. Let me know if I can be of anymore assistance.

2004 Mitsubishi Endeavor Headlight Replacement

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the passenger side headlight bulb on a 2008 Mitsubishi Colt and is it a difficult job?


Probably a quick and straightforward process:
Go to local parts store to get replacement bulb. If it is the type that fits into a holder, continue.........
- Open hood
- Look at back of bad headlight
- Wire will go to Back of light to bulb holder
- Twist holder counter clockwise to remove
- Pull out old bulb
- Insert new bulb
- Reverse rest of process.
Cheers

Oct 01, 2015 | Mitsubishi Cars & Trucks

1 Answer

What size are my headlamp bulbs?


post a pic of the bulb. HID kits vary greatly. Either post a pic, or remove the bulb and the bulb number should be on the base.

May 08, 2014 | 2003 Mitsubishi Lancer

1 Answer

I need to replace the wiring to my headlights in my 1990 mitsubishi lancer se, however I am unsure which wires are the earth, high and low beams.


if you have H4 headlight bulbs ( with 3 pins) looking at them from the front of the vehicle the pin on the right hand side of the bulb is earth, the center one is low beam & the one on the left hand side of the bulb is high beam, if you are still unsure use a test light to check......hope this helps.......cheers.

Jul 11, 2011 | Mitsubishi Lancer Cars & Trucks

1 Answer

2005 Lexus RX330 HID ballast replacement, passenger side headlight. What is the removal procedure please?


I have a 2005 Lexus Rx330 with HID AFS headlight. My passenger side light went out. I thought the bulb burnt out, so I bought a new bulb. After replacing the new bulb, it happened exactly like my old bulb. It light up lightly and then total black out. What's wrong with it? I thought the ballast burnt. I called Lexus dealer and asked for the new ballast/transformer. Surprised me, they don't know what is it. They told me they only know the wiring harness and the socket, but not the ballast ??????? Could you tell me what do I need to replace?

Thanks,

Feb 02, 2010 | 2005 Lexus RX330

1 Answer

I can't get to the high beam bulbs on our 2005 Odyssey. How do I remove the headlight for easier access to the bulbs?


The procedure doesn't call for removing the headlight assembly. It is as follows:
The high beam headlight bulb and the low beam headlight bulb are replaced the same way.

Open the hood. To change the high beam headlight bulb on the passenger’s side, remove the power steering fluid reservoir from its holder by pulling it straight up.

Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.

Remove the bulb by turning it one quarter turn counterclockwise.

Insert the new bulb into the hole and turn it one-quarter turn clockwise to lock it in place.

Push the electrical connector back onto the bulb. Make sure it is on all the way.

Turn on the headlights to test the new bulb.

If you replaced the high beam headlight bulb on the passenger’s side, reinstall the power steering fluid reservoir.

Hope this helps, but if you are having some specific problem leave a more detailed comment and I will try to help you.

Dec 26, 2009 | 2005 Honda Odyssey

1 Answer

2005 Jeep Liberty Sport. Headlights. Passenger Side is dim


TEST
remove both bulbs from the lamps but leave them on their wires switch on and see if the bulbs are still different brightness if not they the passenger side lamp housing has damaged mirror is dirty or missalined and needs adjustment. if they are different brightness then this may be a earthing problem.


Nov 13, 2009 | 2005 Jeep Grand Cherokee

1 Answer

How to Change the Headlights in a 2008 Lancer ES


You shouldn't have to remove the entire headlight assembly to change the bulbs; They should either twist out, snap out, or have a spring clip that holds the bulbs in.

Mar 31, 2009 | 2008 Mitsubishi Lancer GTS CVT Sedan

1 Answer

Side mirror replacement


open the passenger side door there should be a plastic cover usually a flathead screwdriver will remove it once that is removed there should be 3 or 4 bolt to remove and a power cable remove all and replace. good luck

Jan 20, 2009 | 2003 Mitsubishi Lancer

4 Answers

Remove headlight assembly


there is a nut on the left side of the light on drivers side,just the opposite on passenger side. you will need a deep socket. there are 2 10mm bolts on top of the assy. and on the back is a 10mm nut you will have to remove on order to remove the assy.

May 15, 2008 | 2005 Suzuki Forenza

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

3,145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...