Question about 1999 Mitsubishi Galant

Open Question

Am an elctriacian in kenya nairobi where can get the information on how to repair the gdi high pressure pump and how to get the mitsubishi canter flash codes

Posted by on

4 Suggested Answers

  • 328 Answers

SOURCE: mitsubishi canter truck

egr stands for Exhaust Gas Recirculation.....it is a system that takes some of the exhaust gasses and recirculates it back into the intake to be re burnt, although this system is necessary for proper emission readings at your tail pipe.it will likely cause no problems with the driving of your vehicle.........the problem could be a faulty egr valve or it could be a problem in the plumbing (pipes and hoses) of the system.Your best bet is to take your vehicle to a trusted mechanics shop to have them inspect the egr system and replace the faulty parts.
hope this helps.............Good luck!

Posted on Dec 13, 2008

  • 272 Answers

SOURCE: gdi fuel pump galant

http://www2.partstrain.com/store/?Ntt=Fuel%20Pump&N=1676%2011327%204294964190

Be sure you scroll down to the ones for all engines. The top few are for 2.4 Liters only. It is an in tank fuel pump and you'll have to drop the tank to install.

Posted on May 18, 2009

  • 67 Answers

SOURCE: Atmospheric Pressure SensorI have a 2001 Mitsubishi Galant GDI. C

Its located in the air filter housing....The volume air flow sensor also incorporates the barometric pressure sensor and the air intake sensor....If you are replacing either of these sensors replace the volume airflow sensor.......


Posted on Feb 15, 2010

  • 31 Answers

SOURCE: engine shut off at 4000rpm

this sounds like an electronic problem. the control unit thinks about 50000 cycles in a second. it's bound that there could be a problem. a second hand black box or computer box should fix your propblem. goodluck

Posted on May 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find the high pressure pump on and the Mitsubishi pajero GDI and the fuel pressure sensor?


I don't think there is a pump, it is done with engine oil pressure at the injector.

Jul 12, 2016 | Mitsubishi Cars & Trucks

1 Answer

Trying to time a 1988 Mistubishi mini truck.


[PDF]Mitsubishi Canter Truck Engine Diagram - SourceForge

inhub.sourceforge.net/alpha/.../mitsubishi-canter-truck-engine-diagram.p...
mitsubishi canter truck engine diagram mitsubishi canter 4d34 engine manual ...light on dash symbols 95 mitsubishi mini truck repair manual 1988 mitsubishi ...

Timing problem 22r 1987 ' IH8MUD Forum

forum.ih8mud.com > ... > 95-older Toyota Truck Tech
Mar 17, 2009 - I am having trouble timing my 22r, 1987 mini truck. ... adjusting the valves, at TDC, the dot on the timing chain cam gear is not quite all the way ...

Mitsubishi 2.6 liter engine - description and common repairs

www.allpar.com/fix/26.html
I had a 1988 2.6 liter Mitsubishi engine in my Mazda B2600 pickup truck, and ... and I would have been out the $99 for a new timing chain kit (which includes ...

Jan 08, 2016 | Mini Cars & Trucks

1 Answer

1997 gdi galant


Pretty sure the pressure regulator is attached to the high pressure fuel pump on the right hand side of the engine

Jan 13, 2014 | 1997 Mitsubishi Galant

2 Answers

Hi my 2001 mitsubishi montero cant go fast got the code #p0190 wat i have to do now


p0190 is fuel rail pressure sensor curcuit malfunction---- - High fuel pressure
- Low fuel pressure
- Damaged FRP sensor
- Excessive resistance in the circuit
- Low or no fuel
- Wiring harness connector of the fuel pressure sensor
- Fuel Rail Pressure Sensor
- Fuel have a good day !! check the fuel pressure regulator, this may solve problem.

Jun 03, 2011 | 2001 Mitsubishi Montero

1 Answer

Mitsubishi Pajero Exceed 1997 Model Engine #6G74 GDI V6 3500,no power,I suspect its the engine control unit,I order the ECU,but still no power,probably its crankshaft and camshaft sensor.


I solve this problem with Mitshubishi Pajero GDI 6G74 like this: remove the two little filters from the high pressure pump and ,if necessary, insert a external gasoline filter.

Mar 24, 2011 | Mitsubishi Montero Cars & Trucks

3 Answers

Gdi engine issues


I got the same trouble, launch shows Air Flow Sensor, Fuel Pressur switch. Ireplace both few hours OK but again same trouble.
GDI got a common truble its high pressor fuel pump.
check fuel pressor if its low thats the prob
bye

Mar 23, 2010 | Mitsubishi Outlander Cars & Trucks

1 Answer

Gdi fuel pump galant


http://www2.partstrain.com/store/?Ntt=Fuel%20Pump&N=1676%2011327%204294964190

Be sure you scroll down to the ones for all engines. The top few are for 2.4 Liters only. It is an in tank fuel pump and you'll have to drop the tank to install.

May 18, 2009 | 1997 Mitsubishi Galant

3 Answers

Gdi 1800 cedia wagon-odometer 80,000km exact, starting, no power


i can confirm with u that the end of the intake camshaft is broken...tat's why the fuel pressure is low.intake camshaft attach to the fuel pump to boost the pressure.for sure u won't believe what i say...i've seen more than 20 gdi model having tis problem..

Jan 03, 2009 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
1999 Mitsubishi Galant Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...