Dash Boot release on 58 ford fiesta not working also the key remote wont work also.Dash Boot release on 58 ford fiesta not working also the key remote wont work also.
AnonymousMar 28, 2014
key fob opens bootkey fob opens boot
AnonymousMar 31, 2014
how do I reprogram the key fob on a 2001 porsche 911how do I reprogram the key fob on a 2001 porsche 911
You can't post conmments that contain an email address.
Re: how do i reprogram my02 ford focus remote locking key...
Get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The good news is that you are going to most likely be able to fix this program with your 2001 Ford Focus Key Fob. Follow the steps below and you should be able to get it working again:
1) Change the battery
Batteries don't last forever, you'll be surprised how often it's just a dead battery! Click here for a video on how to open a GM key fob, or search our YouTube channel on how to change a battery for your specific year, make, and model!
2) Wipe the board
The board inside your remote can get a lot more filthy than you think! When the board is dirty it can prohibit the contact to the circuit board when you push down on the button. Simply wiping the circuit board off can make your key fob like new again!
3) The old car battery reset trick
I know this sounds absurd, but it works sometimes and is worth trying. If you exhausted all of the options above, disconnect bot terminals on your car battery for 10 minutes. Then reconnect them and try your key fob. This has worked for many people and I have no idea why. If you do, please comment below to explain.
4) Get it checked
Go to your local hardware store like AutoZone or Oreilly's. They usually have a RF frequency tester. This little gadget will let you know if your key fob is sending a signal. If it is, you may need to reprogram your key fob to your vehicle
5) Reprogram:
*** THERE ARE 2 POSSIBLE PROGRAMMING PROCEDURES. ***Procedure #1Note: Obtain all remote transmitters for this vehicle.
Note: Do not depress the brake pedal during procedure.
Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
Within 20 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 4.
Within 20 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 3. For all other remotes.
Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
Procedure #2Note: Obtain all remote transmitters for this vehicle.1Fasten seat belts and close all doors.
Turn ignition from OFF to RUN 4 times within 6 seconds, with the 4th time ending in RUN. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
Turn ignition to OFF. Acoustic signal will sound and system warning lamp will illuminate to confirm programming mode.
Within 10 seconds, press and hold any button on the first keyless remote. Wait for acoustic sound and warning lamp to flash (confirming programming) then release button on remote. Wait 2 seconds but within 10 seconds repeat step 4. For all other remotes. If you only have one remote then continue to step 5.
Turn ignition to Crank or wait 10 seconds to end programming mode.
Cycle the ignition on and off 8 times in a row, then you should hear he door locks cycle, press lock and then unlock on your remote(s) (all remoes must be present or it will be erased from he vehicles memory.) Your remotes should now be reprogrammed.
Hi steve,try the central locking fuse,fuse 63.its in a stupid place (thanks ford)its at the back of fuse panel.two bolts release the fuse board,turn it around and there it sits,20 amp fuse.replaced mine and its working great.hope this helps mate
most,not all fords can be reprogrammed by turning the key switch on and offtill the door locks jump up or down,but if this doesnt work you may have to take it to the dealer.if the locks move ,press the down or up button on remote ,I know this works on most taurus and explorers.
Dash Boot release on 58 ford fiesta not working also the key remote wont work also.
key fob opens boot
how do I reprogram the key fob on a 2001 porsche 911
×