Question about 1992 BMW 3 Series

1 Answer

Head bolt settings for 1992 bmw 318i - 1992 BMW 3 Series

Posted by on

  • 2 more comments 
  • fourlock Nov 27, 2008

    i would like to know the touque setting for a 318i 1992 bmw as i am putting on new head gasket it is an 18cc

  • fourlock Nov 27, 2008

    i would like to know the touque setting for a 318i 1992 bmw as i am putting on new head gasket it is an 18cc

  • yadayada
    yadayada May 11, 2010

    Please provide the liters of the engine.

  • yadayada
    yadayada May 11, 2010

    What engine

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 534 Answers

If its a 1.8L,
oil bolts,
Tighten following correct sequence - in 3 steps,

rear 7 5 1 3 9 front of head
10 4 2 6 7

Step1 22 ft lbs,
Step2 then angle tighten 90deg,
Step3 then angle tighten 90deg again.

Posted on Jun 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a k reg 318i 8v and i need to know the torque settings for the head bolts. Thankyou


Hi, I guess this is an E36. Head bolts should be renewed if heads been off, as they are stretch bolts. Tightened in 3 stages, 1st 30-35 nm 2nd + 90 degrees, 3rd + 90 degrees. Hope that helps

Oct 05, 2010 | 1997 BMW 318

1 Answer

How do i change the torque settings on my bmw e36 316i 1991 j reg its not a 318i but parts of a 318i would thay fit a 316i and work fine


Hi unsure what you mean by change the torque settings, if you mean on the head question is why? If yes for head, there is a tool for that & go to Download PDF search | PDFTown.com
for more info

Jul 08, 2009 | 1996 BMW 318

2 Answers

I need head bolt specs for a 1992 bmw 325 i


I presume you want torque setting. If so here is

BMW 6 cylinder engine
According to my manual as follows:

cyl head to engine block
stage 1 30nm(22ft-lb)
stage 2 + 90 degrees
stage 3 + 90 degrees

cyl head to lower timing chain cover 10nm (89in - lb)

Loosening sequence is from oustside to inside crossover and tightning from inside to outside.

Jun 16, 2009 | 1992 BMW 3 Series

1 Answer

Head bolt touqe settings


Tightening torques

Do not reuse the bolts as they may be stretched.

Cylinder head to engine block
Stage 1: 32Ft-lbs
Stage 2: +90degrees
Stage 3: +90degrees

Cylinder head to lower timing
chain cover: 89in-lbs

Nov 27, 2008 | 1992 BMW 3 Series

1 Answer

Steering column 1992 BMW 318i


Go to the dealer parts dept and ask for them to print a copy of the exploded parts diagram.

Oct 21, 2008 | 1992 BMW 3 Series

1 Answer

1992 auto 318i bmw judders at low revs


Hello there

If you drive an automatic and it starts to judder at low speeds than that means you transmission isn't down shifting as the speed is reduced. In the first instance you should get your transmission oil changed.

Hope this helps and please don't forget to rate me.

Sep 29, 2008 | 1997 BMW 318

3 Answers

Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36


BMW cylinder torque setting all models

According to my service manual as follows.

Cyl head to engine block (torx e12 M10 bolts)

Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees

Cyl head to lower timing chain cover 10nm (89in – lb)

The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Jun 16, 2008 | 1992 BMW 3 Series

1 Answer

1992 BMW Cylinder head


30nm 90 degrees, 90 degrees Renew bolts!!

Jun 16, 2008 | 1996 BMW 318

Not finding what you are looking for?
1992 BMW 3 Series Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers

Doberman

Level 2 Expert

246 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...