Question about 2008 Audi A5 Coupe

2 Answers

MMI not responding

Dear all, i just got a brand new audi a5 and sudently my mmi stoped responding. i press each buton of the interface but un the screen appears onli tne logo" AUDI MULTI MEDIA INTERFACE" and the it stops. has any one else this problem? i don't know what to do.
please help

Posted by on

  • yadayada
    yadayada May 11, 2010

    CALL AUDI CUSTOMER ASSISTANCE HOT LINE, THE NUMBER IS IN THE OWNERS MANUAL

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Audi Master
  • 370 Answers

MMI system is a set of components that are located all over the car (GPS antenna, CD changer, amplifier, bluetooth, screen, controls, tuner...). If one of those fails you won't go further then the welcome logo.

Posted on Jan 20, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello
have you solved the problem? i have same problem on my A5 and the guys from audi told me to replace the battery. i really don't know what to do because the car is starting immediately.
thanks

Posted on Nov 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mmi screen scratches repair


either put a protective slide before use or in ur case replace the screen.....it is a seperate part.........ask ur local dealer

Apr 14, 2014 | 2010 Audi A5

Tip

Enable Audi MMI 3G bluetooth hands-free phone


Activate Audi MMI 3G bluetooth connection and handsfree profile in your car. All Audis with Multi Media Interface 3rd generation are equipped with bluetooth, some just need activation which you can do for free, without adding any hardware.

  • You car need to have MMI 3G system. Check your Multi Media Interface version.
  • Hidden menu must be enabled.

Procedure:
  1. Turn key into II position and wait for the MMI 3G system to start. You can also use keyless buttons.
  2. Press and hold buttons SETUP and CAR.
  3. After couple of seconds hidden green menu will appear. You can now release the buttons.
  4. Navigate to diagnose > settings > Tel settings misc.
  5. Check current value in this line and switch to value with "BT/HFP" instead of "no BT/no HFP".
  6. Press RETURN and CAR buttons at the same time to exit hidden green menu.
  7. Restart MMI 3G with key combination
  8. Connect your diagnostic interface with module 5F - Control Head.
  9. Choose procedure 10 - Adaptation.
  10. Choose Channel 17 and read stored value (should be 0).
  11. Enter new value: 1
  12. Save new adaptation value.
  13. Exit.

on Jul 06, 2015 | Audi Cars & Trucks

2 Answers

My A6 MMI has gone dead and Audi does not want to honor the warranty ( 4 yrs of 50K) . They state that something was spilled,but nothing was> I saw the part, it was clean then then they changed the...


I have a brand new A6 and the MMI is not working. Keeps going on and off. After 4 trips to the dealer, Audi is still not owning up to the problem.

Apr 14, 2010 | 2006 Audi A6

4 Answers

MMI turns on then shuts down after about 30sec.


you nid mmi circuit board replaced,happened to me after spilling coffee,audi wanted to replace the whole thing with a new mmi system for a lot of money, but Ifound someone to change circuit board for abt £200 which is not bad,the only thing is you have to take out the whole centre console and air con unit and armrest off,so u nid some one who knows how to do it.check on tyresmoke and post from there,will respond and give you more info.The previous owner must have spilt something and panicked and sold the car without being honest.It sucks..........

May 07, 2009 | 2005 Audi A6

2 Answers

MMI screen upgrade


Sorry, not posible.

Nov 13, 2008 | 2006 Audi A6

1 Answer

Audi A6 Y. 2006


First push the setup button on the MMI control, and push the MMI button that corresponds to the word "settings" on the screen, and pick "time," push the master control to enter that mode, then turn the knob to change the time. Be sure to back out of the sequence properly or the clock reverts to the previous setting.

Nov 03, 2008 | 2006 Audi A6

Not finding what you are looking for?
2008 Audi A5 Coupe Logo

Related Topics:

1,223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...