I replaced the light bulb, the tail light connector & still nothing
SOURCE: brake light will work but not running light in rear drivers side
change the bulb in the tail light. And check your fuses for the license plate.
SOURCE: No Brake Lights 1993 Chevy Astro Van
Check the ground wire & leads, if not try the multi-function switch in the column
SOURCE: DRIVER SIDE TAIL LIGHT BRAKE LIGHT OR TURN SIGNAL DONT WORK BUT P
if you have the diagram,have a look for a ground problem.ground the assembly to the side that works.the other thing to do if you have a test light is check that there is 12 volts on off on the signal on one bulb pin and steady 12v on the run and stop lights.that means there is an open ground......
SOURCE: Brake Lights and Hazard still dont work
TEST FRONT RIGHT BLINKER CIRCUIT AND REPLACE THE BULB,,WITH PROPER BULB...A DOUBLE CIRCUIT BULB IN A SINGLE SOCKET WILL DO THAT ALSO A SINGLE SOCKET BULB IN A DOUBLE SOCKET HOLDER....CHECK LEFT SIDE BULB FOR ACURANCY
SOURCE: 96 monte carlo rear window brake light works but
This is a common GM specific problem. Your turn signal switch contains an elaborate networking device that has to cancel brakelights while running a turn light. Often times the ground within the turn signal switch is lost causing your situation. After investigating such other possibilities as fuses and loose grounds it may become necessary to replace the turn signal switch. Thank you, Dana
146 views
Usually answered in minutes!
×