a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Start with the key out of the ignition. Open the driver door (all other doors are closed). Driver door is unlocked (other doors don’t matter).
Perform these steps within 5 seconds Insert the key into the ignition (don’t turn it) Insert the key into the ignition (don’t turn it)
Perform these steps within 40 seconds Close, then open the drivers door. Close, then open the drivers door. Insert the key into the ignition (don’t turn it) and pull it out.
Perform these steps within 40 seconds Close, then open the drivers door. Close, then open the drivers door. Insert the key into the ignition and leave in the ignition. Close the drivers door Turn the ignition to ON (as far as you can go without cranking the engine), then back to off . Remove the key from the ignition.
Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
Perform these steps within 40 seconds Press the lock and unlock buttons on the transmitter simultaneously for 1.5 seconds Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted.