Question about 1986 Oldsmobile Cutlass Supreme

1 Answer

Choke is stuck in 86 olds cutlass supreme chugs and doesnt go

I welded in a straight pipe when my converter went and got the carborator re-adjusted but it still goes into drive but it floods out when i press the gas.....I think that the choke is stuck can i fix this?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Oldsmobile Master
  • 6,674 Answers

Choke coil & adjustment should be on side of carburetor.

Posted on Jan 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a pic of the underneath of a 1995 cutlass supreme showing the location of the catalytic converter

The catalytic converter is in the exhaust pipe and is the smaller of the two. One is the muffler and it is usually in the rear of the car and the catalytic converter is just behind the o2 sensor in the same tailpipe. Close to the exhaust manifold.

Apr 13, 2017 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Replace muffler on 1996 cutlass supreme

Not really.
You have to cut the old muffler off and reconnect the new one, either by pipe connectors or by welding it.

Aug 25, 2012 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Can u tell me what engine goes in my 86 olds cutlass supreme?

mines is a its a 5.0 liter 307..u can tell on ur vin number should have an h or y check ur manuel for the complete list...

Aug 06, 2010 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Need a fan belt changing diagram for an 86 olds cutless supreme

mcdevito75 here, I don:"t think there is a fan belt changeing diagram for your 86" you can order the new belts and mark them Water pump, alternator, power steering. as you order them. The power steering pump is the most difficult to loosen and tighten, you"ll also need a crowbar to hold the various units tight after you install the new belts as the belts can"t be too lose nor too tight. Best bet let your local shop change the belts they last a good while and you have the piece of mind all is adjusted correct.

Jun 17, 2010 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Should i use an electric or manual choke edelbrock carb in my 86 cutlass supreme its a 307 v8

better off with a electric choke, and make sure the vacuum choke pulloff is working ,

May 04, 2010 | 1986 Oldsmobile Cutlass Supreme

1 Answer

My 1997 olds cutlass supreme is leaking gas from the tank what do i do?

fit a new tank or get some glue called "tank weld" its like a putty and will stop the leak dead in its tracks im gessing its rusted through?

Nov 15, 2009 | 1997 Oldsmobile Cutlass Supreme

3 Answers

Type of freon used in 1990 olds cutlass supreme. new or old?

This car uses r12 freon that is the old stuff but you can have your system converted over to the 134a.

Jun 18, 2009 | 1990 Oldsmobile Cutlass Supreme Conv

2 Answers

Car idles rough, stalls - 1982 Oldsmobile Cutlass Supreme

Well, you are either not getting enough gas or air. First try taking off your air cleaner and then try to start your car. If that works than just buy a new air filter. If not, try repulsing your fuel filter. Should be under the car between the gas tank and engine. It is a cheap part but serves its purpose. Also you should replace your spark plugs and wires just for regular maintenance. If that doesnt work it could be either the fuel pump or carb. if you don't know that much about those, don't try to monkey around with it. Have a friend or a shop do it. But,,,, before you pay out your *** for unnecessary shop work check out prices for a new carb or fuel pump.

Your problem is could be one or more of those things. And for the very worst scenerio, could be a blown head gasket. Check out the easy stuff first and work your way to the others

Jun 12, 2009 | 1983 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

78010 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8832 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides