Question about 2008 Mazda Cx 7
HAVE A MAZDA E2000I 2005 AND TRY TO FIND DIAGNOTIC CONNECTOR FOR AUTOMATIC TRANSMISSION , PLEASE IF ANYONE CAN HELP
Tips for a great answer:
The ability of the control module or modules to communicate through the serial data circuit
The identification and status of stored DTCs
The use of the Diagnostic System Check - Vehicle identifies the correct procedure for diagnosing the system and the procedure location.
Symptoms When it has been determined through Diagnostic System Check - Vehicle that no DTCs are present, begin symptom diagnosis by reviewing the Transmission Component and System Description . Reviewing the Transmission Component and System Description information enables you to understand the operation of the system. This helps you determine if the condition described by the customer is normal or if a malfunction exists. If it is determined that a malfunction exists, identify the concern by referring to the table Symptoms - Automatic Transmission . The table Symptoms - Automatic Transmission provides common diagnostic categories which relate directly to diagnostic information or procedures.
Apr 17, 2016 | Cars & Trucks
Jul 11, 2015 | 2005 Mazda Tribute
Mar 17, 2014 | Kia Cars & Trucks
Oct 31, 2012 | Mazda Cars & Trucks
Mar 04, 2011 | 2005 Mazda 6
Jun 12, 2010 | Cars & Trucks
Feb 06, 2010 | 1998 Mazda MPV
Oct 16, 2016 | 2008 Mazda Cx 7
91 people viewed this question
Usually answered in minutes!