Question about 1990 Chevrolet Camaro

1 Answer

Need Original Engine Information

1990 Chevy Camaro Covertible VIN 1g1fp33e611118421

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Not sure what kind of info you need but the 8th digit being an e designates that it came with a 305 engine. The 10th should be a L instead of a 1 also.

Posted on Nov 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Firing order for 1990 Chevy Caprice V8 305


look on intake front side it will tell you the firing order

Sep 18, 2010 | 1990 Chevrolet Caprice

1 Answer

How do you know which terminal is number 1 on a 1990 chevy 5.7L 350 distributor cap?


1990 Chevrolet Caprice Classic 5.7 liter V-8 VIN "7"
or
1990 Chevrolet Camaro IROC-Z 5.7 liter V-8 VIN "8"
or
1990 Chevrolet C 1500 P/U 2WD 5.0 liter V-8 VIN "H"
or
1990 Chevrolet C 1500 P/U 2WD 5.7 liter V-8 VIN "K"
or
1990 Chevrolet Corvette 5.7 liter V-8 check this...

695f4d1.gif

Hope helps.

Jul 14, 2010 | Cars & Trucks

1 Answer

Need a set of keys for a 1994 chevy camaro


you need to bring your vin number with proof of ownership to a dealer and they can order you one.

Apr 01, 2010 | 1994 Chevrolet Camaro

1 Answer

My 1990 Camaro RS starter prblem. I saw the starter drive gear is using less or half of the gear on the fly weel like the starter needs a longer noise and the flyweel has marks from were the starter is...


So the engine is not original to the vehicle?

When replacing the motor, did you replace the flywheel with the one from your original motor or did you use the one it came with?

The cure would be to use the one from the original motor and then use your old camaro starter. It is very important to use a flywheel with the same amount of teeth, if it has a different amount YOU WILL have gear meshing issues not catching, grinding, sometimes starting perfectly while other times sounding like its missing. This is due to to incorrect # of teeth to match the flywheel to the starter.

The first step is to find out how many teeth the original part flywheel had if that's not the one mounted now count the teeth on the current flywheel, it should be either 168 tooth flywheel or 153 tooth flywheel.

The engine block doesn't matter if its from a camaro, blazer or chevy dump truck as long as the flywheel and starter have the proper amount of teeth to mesh. If that doesn't seem to be as much of an issue then you just need to add or remove starter shims until the starter teeth mesh with the flywheel teeth, NOT deeply but at about half way up the lead tooth. See proper gear meshing

Also make sure you did not put the flywheel on backward!!!
Also it may be a good turn flywheel and examine teeth for chipped or damaged teeth.
SAFETY TIP: Always remember to disconnect the battery when working with the starter.

TIP:
Get a quality starter, not a part from the dirt cheap discount part store. Places like carry cheap **** that can cost you time and nerves. I once had a problem where I tried to by re-manufactured starter, exchanged it 3 times, then went for new, exchanged it twice and then returned it and went to a more expensive quality supplier and got a far superior product that actually worked perfectly. Because the part is new or freshly re-manufactured does not mean that it is a good part. The same goes for batteries, because you buy them new, sometimes they come DOA dead on arrival.

This is what a starter shim looks like

Here is another article on the topic that explains the issue pretty well.

Good luck!

Jan 11, 2010 | 1990 Chevrolet Camaro

1 Answer

Need an engine diagram for a 1995 chevy camaro 6 cylinder , 3.4.


go to your chevy dealer parts dept and they should be able to print one for you,you'll need your vin #.

Sep 14, 2009 | 1995 Chevrolet Camaro

1 Answer

1990 Chevy Camaro 2.8 v-6 fuel problem?


check for fuel filter if clogged replace also check for fuel pressure above 30 psi is good

Jul 24, 2009 | 1990 Chevrolet Camaro

2 Answers

1990 chevy camaro with a rebuilt 350 Tbi


fuel pressure isnt right.. need to get a fuel pressure regulator so you can regulate the gas flow..

Apr 21, 2009 | 1990 Chevrolet Camaro

Not finding what you are looking for?
1990 Chevrolet Camaro Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...