Question about Volkswagen Golf
I would start by cleaning out the throttle body. they collect soot and not have to be a lot either for it to mess up the idle speed, i had trhis on mine soon as i dipped the clutch to slow down the rpm dropped to about 400 to stall, i cleaned throttle body out ( taking air intake off and wipe round inside and the butterfly will be enough) and now it idles and the rpm dont drop below 900
Posted on Mar 14, 2009
Part number on my vw mk3 1996 is for a pipe from the crankcase pressure valve, 037 103 493 AK hose/pipe £13.69 plus at vw garage, 10 mins to fit, the pipe had worn holes in the corners, car runs fine now no cutting out at junctions or roundabouts.
Posted on May 22, 2009
As mentioned in earlier posts. Remove clean the throttle body refit then carry out basic settings on the throttle body with suitable software on a computer plugged into the diagnostic socket.
Posted on Aug 01, 2014
I ve a mk3 golf and at times driving slow and it stalled. but i can restart and continue. even driving fast engines cut off but on again. pls advise. thanks
Posted on Jun 30, 2009
I had a 1.4 8 valve and it used to cut out when slowing down, it also used to lose power for a few seconds when driving on the motor way. I replaced head gaskets throtle bodies and everything and it ended up being the engine bay lome. maybe its the same with yours!!
Posted on Jun 13, 2009
Tips for a great answer:
Feb 07, 2014 | 2003 Volkswagen Golf
Apr 19, 2012 | 2005 Volkswagen Golf
Nov 22, 2010 | 1998 Volkswagen Jetta
Nov 04, 2010 | 1999 Volkswagen Golf
Sep 22, 2009 | 1999 Volkswagen Golf
Jul 09, 2009 | 1998 Volkswagen Golf
Jul 15, 2008 | 2000 Volkswagen Golf
1,695 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: