My 2001 isuzu rodeo driver side window is stuck down and I just want to hook up the wires to a battery and role it up that way. Do you know which wires to hook up to the battery?
I just figured out one solution that worked for me today. Pull the switch panel from the door unscrew retainer clips from both ends. Remove switches from panel HOLDING PANEL LEVEL (many small parts can move or fall if not LEVEL) The driver plastic switch button is unlike the other windows. The side of the button for the up position has a plastic tab the other do not. Cut the plastic tab, make sure other small switch plates are in position and while level, place the plastic buttons back on to the switch plate. Turn car on and test before installing back into door panel.
Pullswitch drivers side power up brown and white and ground blue and red use jumper wires
I just figured out one solution that worked for me today. Pull the switch panel from the door unscrew retainer clips from both ends. Remove switches from panel HOLDING PANEL LEVEL (many small parts can move or fall if not LEVEL) The driver plastic switch button is unlike the other windows. The side of the button for the up position has a plastic tab the other do not. Cut the plastic tab, make sure other small switch plates are in position and while level, place the plastic buttons back on to the switch plate. Turn car on and test before installing back into door panel.
×
1,057 views
Usually answered in minutes!
Had the same problem on my 2002. Electronic control had water damage from rain water. Had to remove the electronic control and replace it with new. The unit is easy to remove. Think it was about $70 for a new unit.
×