Question about 1997 Pontiac Trans Sport
As in it is asking for a code? If it is please take it to a dealer they can usually get the code for you at no cost.
Posted on Nov 26, 2008
When you purchase a wiper blade, the step-by-step instructions are included in the package. It will be a matter of carefully pulling up and out, then reverse the steps to install.
Posted on Jun 08, 2009
if the static speed increases and decreases with engine speed, possible bad engine ground or perhaps cheap spark plug wires, or something related
Posted on Jul 13, 2009
Well you hit all the major ones, could be crank position sensor, ignition module, a bad coil pack (it should have 3), you need to check that you have spark to each plug while the engine is turning over (!!!be careful as this will hurt if you get shocked!!!), this will rule out coil packs. if you have no spark to any plug your looking at a bad ingnition module (which is what the coil packs bolt to). Hope this gets you on the right track!
Posted on Feb 09, 2010
Tips for a great answer:
May 09, 2014 | 1999 Pontiac Montana
Jan 16, 2014 | Pontiac Montana Cars & Trucks
Jun 19, 2010 | 1998 Pontiac Trans
Feb 08, 2010 | 1998 Pontiac Trans
Jan 29, 2010 | 1998 Pontiac Trans
Dec 23, 2009 | 1998 Pontiac Bonneville
Jul 12, 2009 | 1996 Pontiac Trans Sport
Apr 04, 2009 | 1998 Pontiac Grand Prix
213 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: