Question about 1998 Chrysler Concorde

1 Answer

Lack of interior heat

I have a 1998 Chrysler Concorde that will not blow heat into the interior of the car. I checked the hoses and found out I have hot water running through them but the air blowing into the car is cold. Is there a flap that could be closed and blocking the heat.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

If you are getting air into the cabin, then there is prbably no abstruction the is keeping the warm air out.

Check the coolant leval. There might be enough to cool the engine, but becuase the heater core is higher than the engine, the coolant might not be able to get to it.

Posted on Nov 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do i do to get my 2002 Chrysler Concorde to blow heat?


Check the temp of the two hoses going to the heater core, one should be hotter then the other, if they are both the same of very little difference you have no flow through the core, if there is a heat control valve in the supply or return line it could be bad, or has a vacuum leak so its not actuating if not the core is probably plugged, or could be leaking, but usually you will smell the fluid and/or see a wet spot on the floor.

Mar 02, 2015 | 2002 Chrysler Concorde

1 Answer

My 2002 Chrysler Concorde LX heater just stopped blowing hot air, fan and all works fine, engine cooling system works fine, just no heat.


as I remember there is a actuator that is controlled by the switches in side of car, under the hood, hose from engine goes to it, it will get weaker and will tend to fail

Dec 28, 2012 | 1998 Chrysler Concorde

2 Answers

Where is the thermostat located on a 1998 chrysler concorde


follow your top radiator hose to your engine, it is located in that housing.

Sep 30, 2010 | 1998 Chrysler Concorde

2 Answers

Will only blow cold air , sometimes it will blow hot


sounds to me like a blend door problem or blend door actuator problem

Mar 03, 2009 | 1998 Chrysler Concorde

2 Answers

Where is the thermostact for a 1998 concorde 2.7 engine locate


Hi, here's an exploded view of the engine. i would check the heater core shut off valve to see if its open. this may be the reason for the cold air.

85b434a.jpg

Feb 28, 2009 | 1998 Chrysler Concorde

2 Answers

Temperature gauge is up and down


Sounds like youve noyiced the first sign of a failing thermostat.Its now taking more heat to open the thermostat or its jamming on the slide when it opens and closes.Good luck with it and pay special attention to your temp gauge until its replaced.

Dec 14, 2008 | 1998 Chrysler Concorde

Not finding what you are looking for?
1998 Chrysler Concorde Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...