Question about 2003 GMC Yukon Denali

1 Answer

The ignition won't turn for a 2003 gmc yukon denali

I have tried both of my keys and it still won' turn

Posted by on

  • 7 more comments 
  • chace335 Dec 15, 2008

    I have the same problem on a 2002 Denali XL. Steering wheel is unlocked and will turn both ways. No previous problem with ignition switch.....all of a sudden neither factory key will turn. Gear selector is in park and locked.

  • kjerns Feb 10, 2009

    I have a 2003 Yukon. Same problem. I adjusted the wheel direction as was recommended, but it did not change the situation. My repair shop (Dealer is out of business now) has seen this on other GM trucks/SUV's. They plan to remove the ignition switch and have it checked by a Locksmith. I will report back.

  • dnagel01 Apr 10, 2009

    I have the same problem. Steering wheel is not locked and gearshift stuck in park and key will not turned....uggh

  • Anonymous Mar 13, 2014

    Tried to change cd in the cd changer in my 2003 gmc yukon and cd won't come out and cd icon blinks

  • Anonymous Mar 16, 2014

    when using the turn signal for the 2003 Yukon Denali it causes the flashers to go off on the rest for the rest of the vehicle

  • Anonymous Mar 16, 2014

    When I go to use the turn signal for some reason it triggers the flashers to come on on the entire vehicle

  • Anonymous Mar 21, 2014

    my 99 denali won't go into gear

  • Anonymous Mar 24, 2014

    Turn ignition to on all is good turn to start to power to starter will not crank

  • Anonymous Mar 30, 2014

    changed out ignition switch and tumber wi not start

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 40 Answers

Make sure the wheels are straight.. if you park them with them turned to one side the steering column is under a bind.... if they are turned all the way to the right you will for example have to turn it a little to the left to release pressure as you turn the key...

Posted on Nov 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

We have a 2003 yukon denali xl. we have a signal saying battery not charging. we replaced battery and alternator. still won't charge. truck goes completely dead. no lights, radio anything. what el


I'll try to help, everytime something gets replaced on these yukons, that circuit needs to be RESET ! Is there a reset button, on your steering wheel, to reset a variety of functions ? , check owners manual, or call your dealer for better advise

Feb 15, 2013 | 2007 GMC Yukon XL Denali

1 Answer

2003 Denali alarm will not actativte after I lock doors


put key in turn switch forward find your valet switch for alarm should be a button press it twice or the button might be your alarm blinking light, press.

Mar 24, 2011 | 2003 GMC Yukon Denali

1 Answer

Steering locks making it hard to turn when driving on 2003 gmc denali yukon xl


Did you find a solution? my 2003 yukon is also doing the steering lock thing

Feb 09, 2011 | 2003 GMC Yukon Denali

1 Answer

I have a 2003 GMC Yukon Denali XL. Everytime I turn to the right I feel something banging in the steering wheel


possible intermediate steering shaft, becomes lose and annoying, are you making a hard right turn? does it happen when you go over bumps?

May 10, 2010 | 2003 GMC Yukon Denali

1 Answer

Yesterday i ran out of gas. I filled a gas can and put gas in but the car still wouldn't start. I have a 2003 gmc yukon denali, i was told by the dealer that the fuel pump may have burnt out. any advice?


i would say the fuel pump went out also here's a easy way to find out put your head down by the gas tank have someone turn the key on if you here a buzzing sound it's good if you hear nothing well get ready to drop that gas tank.

May 05, 2010 | 2003 GMC Yukon Denali

1 Answer

Clock won t stay set


sounds to me like a diode has failed in the clock. OR, the clock should have 3 wires on the back, earth, constant power and ignition, it sounds like the constant supply has be severed somewhere. Good luck

Nov 19, 2009 | 2003 GMC Yukon Denali

1 Answer

2000 yukon denali will not start


I had problems with my remote button, with battery fully charged turn on key for ten second, turn key off un-hook positve side of battery, re conect turn key to on postion then try to start, it worked for me I have a 2003 denali yukon XL, the motor would fire then stop.

Jul 29, 2009 | 2000 GMC Yukon Denali

1 Answer

2000 gmc yukon denali wont start i think because of the security


you have a bad ignition switch but if you turn key on for ten minutes until the light stops flashing then turn off key then try to start this should reset the security system

Mar 19, 2009 | 2000 GMC Yukon Denali

Not finding what you are looking for?
2003 GMC Yukon Denali Logo

Related Topics:

957 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...