Question about 1989 Land Rover Range Rover

2 Answers

1996 Range Rover starting trouble when warmed up

My rover starts ok when cold (though runs a little rough) but when driven a bit and car warms up and you shut it off....then try to start it again a few minutes or more later - will not start, just cranks but no fire
this problem is KILLING me - can't figure it out help!! :(

Posted by on

  • elwe77 Nov 26, 2008

    My rover is petrol

  • dode110 May 11, 2010

    is u range rover petrol or diesel

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check or replace the coolant temp switch. they are cheap and in my truck it controlled the pcm's lean or richen function. which after warmed up changed the mixture.

Posted on Sep 20, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 89 Answers

Check the fuel pressure when the vehicle is cold and compare it with when it's hot.Also check the fuel return dump valve , that this isn't returning too much fuel.

Posted on Dec 03, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Range Rover starts up runs fine but after warmed up and shut off by key won't start for at least 2 hrs. Rick Please help


sounds to me like the cat converter is stopped up. Usually the engine will die out after a short while though if it is clogged. Over time the pressure will release enough for the engine to start again. The coil could be getting hot and fails to spark, but again this should kill the engine after a short while. If you let the engine idle will it die on its own? more info if you can supply any would be great.

Dec 13, 2014 | 1992 Land Rover Range Rover

1 Answer

2007 range rover ticking on cld start up


check for faulty hydraulic lifter/s Check for correct viscosity of oil. Check for correct type of oil filter ( must have an anti-drain back valve in the filter.)

May 19, 2014 | 2006 Land Rover Range Rover Sport

1 Answer

Ticking sound on col start up


this sound like one of your lifter needs to be adjusted or it could be a simple exhaust leak when things warm up they expand and close the gap my v8 in my land rover was just a simple adjustment to the rocker that opens the valve just might have to much lash its basicly a chev 350 v8

May 19, 2014 | 2007 Land Rover Range Rover Supercharged

1 Answer

Hi, I have a 1998 Range Rover P38 and it takes up to 4 cranks to start the engine when cold. After the vehicle is warmed up it starts after the first crank. Any idea what the problem may be?


Hi Servo, Try replacing the temperature which sends signals to the computer. Seems you have a problem with the cold start system which is controlled from that sensor. Regards John

Apr 23, 2012 | Land Rover Range Rover Cars & Trucks

2 Answers

97 cavalier starts and runs ok from a cold start after a few minutes of warm up it starts to run rough and miss. If i try to drive it it will start out ok but won't shift automaticly but shifts fine m


Sounds like possibly more than on problem, crankshaft position sensor, or ignition module likely on starting prob which maybe affecting shifting due to hard code in ecm, or shift prob could be shift solenoid in valve body of transmission. Both parts readily available from local parts store

Nov 27, 2011 | 1997 Chevrolet Cavalier

1 Answer

Range rover 2.5D P38A model. Loss of accelerator


Give me some more information about this problem. May be i can help.

Jul 12, 2011 | 1996 Land Rover Range Rover

1 Answer

When my 93 mazda b2600 is cold it will try to start for a second or two with the engine bouncing around. It will do this four or five times. If I leave it in the start position for a minute then try to...


Could be a problem with the fuel hose connections. When cold they expand allowing the system to **** air. Warm they contract making a better seal. Try clamping the connections to the filter and on the tank.

Mar 23, 2011 | 1992 Mazda B-Series

1 Answer

When i start the car it drives ok but after warming up a bit the car loses acceleration and starts to boggle?


check for a bad fuel pump relay. it maybe geting hot and shutting down. it may be a bad coolant tempurature sensor also, that sends info to ecm.The engine will think it was still cold, even though it was not, causing all kinds of things to run draggy. thats why it runs ok when its cold. it sends wrong info to computer. thinking its cold, when in reality its warm. have a good day !!

Mar 19, 2011 | 1996 Ford Probe

1 Answer

Difficulty starting when warm, OK when cold


Have you checked the fuel pressure regulator for leaks into the intake

Mar 29, 2010 | 1990 Ford Probe

Not finding what you are looking for?
Cars & Trucks Logo

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...