Question about 2004 GMC Envoy

1 Answer

I have a 2004 GMC ENVOY I got in it started it pressed the brake and could not put it in gear. I tried to turn the ignition switch off but would not go back far enough to take the key out.I have no power to the heater, acc plugs,dash lights,4WD switch. CAN YOU HELP!!!!!!!!!!!!!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 324 Answers

Your ignition is bad, replace the ignition and your problem should be solved....

Note: if you have not done this before, you may want to have a shop do it for you.

Posted on Nov 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 gmc envoy and the security light came on what does this mean?


  1. 2004 GMC Envoy Security light car not start - Questions - Fixya

    www.fixya.com > ... > GMC > Envoy > 2004 GMC Envoy...will not start replaced ignition switch and car will not turn over. Is the security light on ?If your truck has a pass key system, the sensor in the lock may not be ...
    ON GOOGLE

Jul 15, 2015 | GMC Cars & Trucks

1 Answer

Key stuck in 2004 gmc envoy and car will not start


make sure battery is 12.6 volts. if not you not going to be able to get transmission go all the way in park to remove ignition key.when you press brake pedal it energize brake transmission shift interlock to get transmission all way in park to remove ignition key.if all is good battery is 12.6 volts.sound like ignition switch lock cylinder broken more likely.

Nov 06, 2011 | 2004 GMC Envoy

2 Answers

Key stuck in on posistion of 2004 envoy. Engine could not turn off. Had to unplug battery to turn off. Key still stuck in on posistion. Will not come out


Hello and welcome to FixYa!
As a first course of action, I strongly suggest that you spray WD40 on the ignition switch. This will help loosen the gearing, by then you can remove the key.
Hope this helps and thank you for using FixYa! Have a good one!

May 24, 2011 | 2004 GMC Envoy

1 Answer

I have a 2004 GMC Envoy XT with 4wd. I started to


sounds like you have a broken shifter cable.Go under the rig and shift the transmision manually.Put on the parking brake and on the drivers side of the trany should be the lever to move.Look for the broken part while you are there it will also help to locate the shift lever on the trany.

Jul 31, 2010 | 2004 GMC Envoy

1 Answer

2002 GMC Envoy, i put the key in ignition and vehicle will not start sometimes and other times is starts fine. we have checked the starter, battery and battery connections, all fine. Changed the starter...


Ignition switch and neutral safety switch. Next time it happens wiggle thekeys in the ignition switch and try to restart.If it starts its probably the ignition switch. Then locate neutral safety switch on brake pedal and put meter on B+ wire from switch to starter relay and see if you get B+ on the would -be- crank. Next locate B+ wire from starter relay to starter hook a meter to it and see if you get B+ on the would -be crank.
Where ever B+ is missing is your problem.

Apr 14, 2010 | 2002 GMC Envoy

1 Answer

The button on our 2004 GMC Envoy gear shift will not depress when


The brake rlease switch for the gearshift might need adjusted-replaced or the shifter itself might need adjusted

Mar 22, 2010 | 2002 GMC Envoy

1 Answer

2006 GMC ENVOY starter not turning over, with ignition switch on.


the ignition switch is a problem with these vehicles so that would be my first call.

Oct 09, 2009 | 2006 GMC Envoy

2 Answers

Suburban stuck in PARK


I accidently posted under 2004 Envoy - actually a 1997 Chevy Suburban. Found the switch on the brake actuator rod, sprayed with WD 40 (sloppy - hit or miss) - and moved the switch around. Now works fine. If I could find a way to remove the switch, I would replace. I may find the wires for the power and release servo and jump those out with a remote switch in case of future problems.

Jun 02, 2009 | 2004 GMC Envoy

Not finding what you are looking for?
2004 GMC Envoy Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...