Question about 2002 Chrysler Town & Country

1 Answer

The key does not move

I try turn on the car and the key goes in, but does not move

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 355 Answers

Hello,
The cause of the key not turning can be caused by either the key is worn out (try a newer & known good one) or because the ignition is full of metal filings from excessive use. Try using a can of WD-40 with a spray tube attached and squirt it into the ignition switch (this usually flushes out the filings and lubricates the switch).

Good Luck!
Rich lilja

Posted on Nov 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Light comes on but when you hit start it won't do anything how do I fix this?


Three Reasons Why Your Car May Not Start

www.cheap-auto-car-insurance-quotes.com/.../why_car_wont_start.htm
Starting Problem # 1: Engine Won't Crank At All ... Scenario: When you turn the key, the lights on the dash come on, but you don't hear anything. ... If you have to move your head to one side to get the needle to move off empty, try adding some .

Car Won't Start ' The Family Handyman

www.familyhandyman.com > Skills
If you turn the car key and your car won't start, don't give up. Before you ... Symptom:Starter goes click; Symptom: No click when you turn the key; Symptom: Engine cranks but won't fire up ... If the light goes out, it's a sign the battery is really weak-almost dead. ... How Knowledgeable Are You When It Comes to Migraines?

Nov 24, 2015 | Cars & Trucks

1 Answer

2005 silverado 4x4 oil pressure gauge goes all the way to the right to 80 and does't move only when key turn to off.


Either you have way to much oil in the truck or the pressure switch is no good.

Mar 16, 2013 | Cars & Trucks

1 Answer

The key goes all the way into the ignition but cannot turn either way steering is locked gearshift is in park I need help


Try moving the steering wheel both ways as you try to turn the key. If you parked with the wheels turned, it can put force on the lock pin in the steering column and make it very difficult to turn the key.

Aug 17, 2011 | Plymouth Neon Cars & Trucks

1 Answer

The key goes in alright but wont turn


get an expert lock smith to recut you a new key the tumblers mite have moved or just change the ignition switch

Jan 07, 2010 | 1994 Chevrolet Cavalier

1 Answer

2000 Chevy Blazer3 - key goes in but will not turn and the steering column will not turn either. Tried moving it slightly while I tried to turn key still not working. Thanks, stuck mom:)


push the key in all the way with the ignition ( key holder) toom with one hand, with the other hand turn the lock steering wheel side to side while depressing the brake pedal - good luck

Sep 30, 2009 | 2000 Chevrolet Blazer

1 Answer

I have a 95 the key goes in but won't


Either the key or the keyswitch is worn.To check the key switch with a little preasure on the key try moving the steering wheel back and forth this should release the steering lock and allow the key to turn If this dosent work get a key cut and it may work but if possible get a new one from a dealer they will get you one if you have the chassis number and proof of ownership.

Aug 30, 2009 | 1995 Jeep Grand Cherokee

1 Answer

2000 lincoln ls ignition key will not turn


try tapping the end of the key gently with a small hammer while trying to turn it this happens alot on Ford Escape and Focus

Jan 11, 2009 | 2004 Lincoln LS

1 Answer

Key wont turn in ignition 2006 Corolla S


have tilt wheel? try unlocking tilt and moving it as you try to turn key..replace key and/or ignition switch if that doesnt work..if it does ..the linkage is damaged in steering column to switch at base

Dec 08, 2008 | 2006 Toyota Corolla

1 Answer

Driver's seat position


Try setting the seat position memory before you switch off.

Jul 25, 2008 | 1995 Jaguar XJ6

1 Answer

Ignition won't turn


I have had the same problem. I solved it by replacing the ignition switch. However the switch is adjustable on the steering column. Fastspeed it sounds like that your switch just needs to be adjusted up or down the column i can't remember which way it should go. You can find out by finding the rod that goes from the key to the switch down by the pedal (it usually runs on top of the column) while turning the key to start figure out which direction the rod is going. You need to move the switch so that the rod goes a little further into it (or out of it depending on which way the rod moves) and makes contact with the "start contacts" in the switch. Be carful not to move it too much in that direction or it will not move out of the start position when the key is moved out and/or not be able to turn off the car, both are not good problems to have. Let me know if this helps or if you need clarification.

Jul 05, 2008 | 1994 Jeep Cherokee Country

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...