Question about 2000 Mitsubishi Galant

1 Answer

Headlights not working 2003 Mitsubishi Eclispe (Spider)

Both headlights are not working. We have checked the fuses and checked the bulbs to see if they were burnt out. What else can we check?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 60,667 Answers

Pull the headlight switch and test it.

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change headlight lamp drivers side


On the back, engine side of the headlights there is a rectangular plate which allows access to the bulbs (lamps) to remove this there are locking bars, pry these, up and down away from the plate, remove plate.
The headlamp bulb is the larger one and is retained with a spider clip, above the bulb pinch the spider clip and push slightly forward while opening the pinch. The bulb should now be loose with a wiring block attached.
Slide the bulb out of the recess, remove the wiring harness by pulling the block away from the bulb.
You can now replace bulb, which should have a protective sleeve of foam or card protecting the glass, do not touch the glass of the bulb, touching the glass will cause the bulb to blow when it gets hot.
To replace bulb, push spider clip away from recess, while holding the metal part of the bulb remove sleeve and insert bulb into recess, turn the bulb to ensure it has seated flat into recess, refit spider clip over bulb pushing forwards then pinching, refit wiring harness.
Check the lights to ensure bulb is working.
Replace rectangular plate & clip locking bars back into place. How To Install Replace Change Halogen Headlight and Bulb 2005 07 Ford Focus

Nov 18, 2015 | 2003 Ford Focus

1 Answer

Headlight wiring diagram


Honestly, there simply not much difficulty to the way headlights are wired on any vehicle. Standard headlights receive positive 12v from the headlight switch directly (or through a relay, if you have automatic headlights), and the switch receives power through the fuse block from the battery. When you turn the headlight switch on, you should get 12v at the input connector to your headlights. If the headlight connector is not receiving +12v at the connector when you turn the headlight switch on, check the fuse, the switch, and the relay. If the headlight assembly is receiving +12v at the connector, check the bulb. If the bulb tests good with an ohmmeter, check for a broken ground wire. That is simply all there is.

Jun 24, 2014 | 2000 Mitsubishi Galant

1 Answer

Headlights do not work, but when I switch to brights they do


You can check the fuses and fuse able links for blown fuses also look at the wiring connection to see if loose or wire shorting out on any metal and if the connection is good and all fuses good then you will need to replace the headlamp bulb or bulbs. Most of the time only one side goes, very rare to have them both go at the same time. Check for a short in the wiring somewhere, that could cause them both to go at the same time. Hope that Helps

Jan 02, 2014 | 2000 Mitsubishi Galant

1 Answer

Passenger headlights only do not operate.


check the bulbs first and also the fuses theres a fuse for each side and for low and high beams, start there, good luck.

Feb 19, 2010 | 2002 Mitsubishi Eclipse Spyder

1 Answer

No dipped beam headlights on audi a4 1,9td 2003


Check up dipped beam headlights fuse inside fuse box. For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram. If the dipped beam headlights fuse is OK, check up dipped beam headlights bulbs.

Dec 28, 2009 | 2004 Audi A4

1 Answer

Dim headlights on 2002 Mitsubishi Eclispe GS


the ground connection from the headlights to the vehicle's body is either very poor. Run a new wire from the headlight's ground wire to a good ground point

Mar 15, 2009 | 2002 Mitsubishi Eclipse

Not finding what you are looking for?
2000 Mitsubishi Galant Logo

Related Topics:

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...