Question about 1994 Cadillac DeVille

7 Answers

How do You replace bushings in a Cadillac Rear Knuckle?

Are there OE grade replacement bushings instead of the molded Poly Plactic junk ?

Posted by on

7 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

These bushings press out of the knuckle in only one direction yes they are replaceable and available for aftermarket you can call me 1-270-746-9850 and i can explain how to press them in and out had the same problem with my secretary's caddy and we replaced them and no problems since


Thanks

Posted on Dec 04, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The Brass is Bronze and provides protection AGAINST CORROSION for the apprentice who knows everything...!!! Last Shot Auto Parts Designed a sucessful part modeled exactly as Prior Cadillac Models and it is specific to the DIRECT APPLICATION of the BUSHINGS required by GM ENGINEERS !!!!

Waltons Mfg parts will not hold up with flexing the urethane....... they tell you to lower the assembly to ride conditions then tighten !!???!!! With the Last Shot Auto Parts LLC the Upper Bushing Rotates as it should on the 954 Bronze Bearing Bushing ( by the way it is the same material used for your rod bearings in the motor !!)

POLYurethane parts won't last !! SECONDLY CERTIFIED MECHANICS WON'T INSTALL THEM FOR YOU FOR A REASON !!! THEY DON'T WANT TO BE LIABLE!!

All of it documented and Patented !! PAT PENDING on both Bushings for a reason !! THEY WORK THE BEST !!

CHECK OUT "LSAPLLC" ON EBAY AND SEE THE FEEDBACK FOR YOURSELF

WE HAVE THE ONLY PRODUCT PATENTED DIRECTLY FOR THE APPLICATION ......

WHY MESS WITH THE REST..... WHEN YOU CAN HAVE THE BEST ? ! !

Posted on Mar 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try Last Shot Auto Parts, LLC they sell on ebay as How do You replace bushings in a Cadillac Rear Knu - s.giflsapllc they say they are located in flint , MI, United States but just so you know i put a set of the cheaper ones in from cadillacbushings.com and they have worked fine for the last six months

Posted on Feb 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Call 810-441-7215 or visit us at :

http://www.lsapllc.com

We Support our Customers on installation of Bushing replacements for your Cadillac

Posted on Dec 04, 2008

  • lastshotAuto Dec 04, 2008

    Come see us for Help in replacing Cadillac Rear Knuckle Bushings at:




    http://motors.search.ebay.com/_W0QQsassZ...



    See What Our Customers Think:



    Great communication, on time shipping, and fair price! Great ebay transaction!!!
    Buyer:

    karl0532 ( 69)
    Dec-03-08 17:39

    CadillacBushings 93-99 (#270296906995)
    US $199.00
    View Item


    New parts as described
    Buyer:
    oldgearhead58 ( 516)
    Dec-02-08 09:33

    93-99 Cadillac Upper Knuckle Bushings (#270297406780)
    US $99.00
    View Item


    Great parts and great price, thank you
    Buyer:
    gashbay3bqq ( 19)
    Nov-30-08 19:17

    93/97 Cadillac Deville Knuckle Bushing Replacement (#270296111044)
    US $199.00
    View Item


    Item as advertised.........Quick Shipping.........Would do business again!!!!!!!
    Buyer:
    letmehavefaith ( 167)
    Nov-23-08 16:22

    93/97 Cadillac Deville Knuckle Bushing Replacement (#270293655470)
    US $249.00
    View Item


    Great seller!!! Easy to deal with!!! Its about time someone made these bushings!
    Buyer:
    jerrymk01 ( 2 )
    Nov-21-08 10:45

    93-99 Cadillac Seville Rear Knuckle Bushings (#270296116173)
    US $199.00
    View Item


    Everything ok !! Fast shipping !! Thank you !!
    Buyer:
    chevy-1978 ( 254)
    Nov-20-08 14:48

    93-99 Cadillac Seville Rear Knuckle Bushings (#270291846142)
    US $249.00
    View Item


    A+ arrived as promised
    Buyer:
    disttechpc ( 98)
    Nov-19-08 13:25

    93-99 Cadillac Upper Knuckle Bushings (#270297406780)

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Best price I have seen on rear bushings is dormanproducts.com. I have a 1995 cadillac deville and upper and lower are $33.90 each side. An individual can not purchase directly from Dorman, bur you can go to their site and speaqk with live specialist to get your part number and where it can be purchased. I purchased mine thru Dorman via Amazon.com. 1995 Deville part # is 905-504. I am sure you will find this helpful. God Bless

Posted on Aug 31, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mike the owner of cadillacbushings.com has new site trying to ride on Last Shot Auto Parts, LLC reputation and name, and SLAP DOWN their product too with:

www.lastshotautopart.com


WHAT DOES THAT TELL YOU about WWW.CADILLACBUSHINGS.COM?




Polyurethane parts SQUEAK and SO DOES THE DISHONEST UNETHICAL OWNER!


Then check out real bushings at WWW.LSAPLLC.COM the REAL Last Shot Auto Parts LLC website !!

Posted on Apr 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The best solution is the product offered by Walton Manufacturing (www.waltonmfg.com). This is a Canadian company that has designed a product specifically for this application. Last Shot offers parts that are meant for other applications and have been turned down to fit the Cadillac knuckles. They offer brass washers to make the length correct but brass will cause rapid corrosion the the control arms. If you are interested in what is involved in replacing the bushings, there is a complete set of instructions on the Walton Manufacturing web page.

Posted on Mar 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair vw


Lift Vehicle and place on axle stands. Remove wheels. Disconnect the lower control arm from the bolts that hold the ball joint, or from the knuckle. Undo the rear two bolts that hold the ''D'' shaped rear bush and the bolt that holds the forward bush. Have it pressed out and replace with new one. Reverse the procedure for installation. While the arm is out check the condition of the ball joints and replace if needed. After assembly have the front wheel alignment checked.

Jul 04, 2014 | 1995 Volkswagen Polo 1.6

2 Answers

Why my rear wheel is not straight like the front wheel.........


this is probably from a failed suspension bush and or spring/ shocky . Have it inspected by an accredited suspension specialist . When done ensure that the rear wheels are properly aligned as their alignment affects the front wheel alignment.

Jun 23, 2014 | 1999 Mitsubishi Galant

1 Answer

Rear upper and lower control arms life replaced at 70k,replaced at 85k, replaced at 100k,replaced at 115k now at124k needs to be replaced again what could be problem?


Have you had a four wheel alignment done recently? Do you replace all the links in their entirety, or just the bushes? If just the bushes, try an aftermarket set of poly bushes?
what happened just before 70k? Did you have a crash? Did you damage the axle/housing (bent rear axle)?
please tell us how you solved this problem as it could help someone else in the future..thanks.

Jun 16, 2014 | 1999 Nissan Pathfinder

1 Answer

Rear knuckle bearing needs replacing


bushing or bearing? bearing remove rotor and connector and unbolt.
bushing in rear are usually replace component

Dec 06, 2013 | 1995 Cadillac DeVille

1 Answer

Replacing bushings for the rear on a 2004 cadillac cts 3.6L


The howling is more likely rear hub
bearings- in wheel knuckle assy

Check for differential axle seal leaks
& check fluid level before that goes bad

I have a 2004 Lincoln LS with similar rear
drive & no problems with dry rot & it sits outside

Replace the worn parts

Try Rock Auto.Com & try for Moog Parts

The Stabilizer Links are shot for sure front & back

Mar 06, 2013 | Cadillac CTS Cars & Trucks

1 Answer

2001 Aztek rear brakes thunking noise.


rear sway bar link pins and bushings

Oct 18, 2012 | 2001 Pontiac Aztek

2 Answers

Are the bushings in rear knuckle of 95 eclipse replaceable


Yes, but not always cost effective. Some performance aftermarket companies have them available, and Ebay is as good as any source for locating them.

Jan 16, 2012 | 1995 Mitsubishi Eclipse

1 Answer

How hard is it to change my rear control arm bushings to poly bushings. I know how to take them apart. Do I need a press to change the bushings? 2002 focus zts


Yes, you will need a press. I've replaced rear control arms in these before (Didnt bother with just the bushings) and they are a pain in the ***. In most cases the bushings seaze onto the bolts, and its a constant fight to get everything to break apart. I believe i had to cut a couple bolts off too.

Mar 26, 2010 | 2002 Ford SVT Focus

1 Answer

How do you replace a rear passenger side torison bar on an oldsmoblie alero 1999


SAFELY RAISE AND SUPPORT REAR OF CAR ON JACK STANDS. REMOVE THE TORSION BAR TO KNUCKLE BOLT WASHER AND BUSHING.REMOVE TORSION BAR TO CHASSIS BOLT.REMOVE BAR FROM THE CHASSIS.TO INSTALL.INSTALL TORSION BAR TO THE CHASSIS TORQUE THE NUT / BOLT TO 48 FT LBS.PLUS ADDITIONAL 120 DEGREE TURN.TORSION BAR TO THE KNUCKLE TORQUE THE BOLT TO 51 FT LBS.

Sep 24, 2009 | 1999 Oldsmobile Alero

1 Answer

2002 Pontiac Aztek - AWD disable light and Anti Lock Light


AWD disabled from a sensor unit in rear differential that senses high temp. This thing is over $300. Whine is from fluid. Need to change fluid. This versatrack fluid is about $40 per bottle and you need 3 bottles. Thumping noise is from loose rear knuckle bushings. These are part of the entire rear knuckle assy. and you must replace complete knuckle.

Jun 22, 2009 | 2002 Pontiac Aztek

Not finding what you are looking for?
1994 Cadillac DeVille Logo

3,198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...