Question about 2000 Oldsmobile Intrigue

2 Answers

I just bought a 2000 Olds Intrigue, and notice it has a problem with its front signal lights, when the left or right signal is set, the front bulb will not go on steady nor blink, while the rear light will blink fast from the same side. I replace the hazard switch, but it did not solve the problem. Does anybody has an idea of what is causing this problem? Thanks a lot.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Your "Emergency Flasher Switch" has gone out and it must be replaced. It fixes all strange-acting turn signals and "emergency flasher" lights. Your local GM dealer has it in stock (mine had it in stock for my 98 Olds Intrigue) or you can probably get it from your local auto parts store (or you can order it there). You can replace it yourself though the center air vent in the dash of your car and you just unplug the bad one one plug in the new one. (It's a really tight fit for your hand, though.) If I can do it, you can do it. If you want specific directions with drawings for how to do it, write back to this site and I'll make sure I can get the drawings done for you to do it yourself. I replaced that switch after I'd tried all other possibilities, and it has worked perfectly since then (more than a year ago). Best wishes! This emergency flasher switch fixes all those signal problems at the same time and you'll end up with "new car" turn signals!

Posted on Sep 25, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 3 Answers

I had the same problem with my car I used some electrical contact lube that you can get at the auto parts store what happen to my car the leads in the plug for the bulbs were starting to corrode

Posted on Nov 28, 2008

1 Suggested Answer

  • 3 Answers

SOURCE: Front signal light Turn on but do not blink

try some electric contact lube in the light socket the leads may be corroded

Posted on Nov 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have no signal lights, left or right, on my 2000 Oldsmobile Intrigue. I was having a problem with a front bulb not contacting properly making the right signal flash rapidly. I left it flashing while


Check if your emergency flashers still work. You possibly need a new flasher. Some cars have separate flashers for turn signals and emergency flashers, but some they are both together. If your emergency flashers still operate leave them on and find the flasher (follow the clicking noise the flasher makes) and see if there is another flasher right next to it. swap with the emergency flasher and see if your turn signals work again. If so, replace the faulty flasher.

Jul 26, 2014 | 2000 Oldsmobile Intrigue

2 Answers

2000 olds shihouette right turn signal blinks fast and back right does not blink, changed bub in right rear and still have problem


Could be the switch, but more likely the socket. Check the socket for power and ground with a test light.

Aug 21, 2012 | 2000 Oldsmobile Silhouette

1 Answer

Turn signal blinker problem. They work properky


sounds like wiring.or there may be a plate in the steering wheel.the plate in the steering wheel seems more plausible because wiring on both sides is less likely.it wouldn't hurt to check the wiring as far as you can to the rears though.any brake lights work?

Jul 21, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Right signal lights not working. ive changed the bulbs still not working. the one at the back flickers really fast


flashing fast is because only one bulb is working. look for power to front signal light and check ground wire

Nov 30, 2009 | 2000 Oldsmobile Intrigue

4 Answers

Front signal light not working and rear signal lights flashing fast on 1999 intrigue


Your front turn signal socket is shot. Buy a new one at the dealer for about 30.00. It will fix it. You may be able to clean it and wiggle it to get it to work. But it wont last very long. I had the same problem. Replaced the socket and it is fine. Note: If one side is bad the other side it not far behind. Probably 2 or 3 months it will go also. Good Luck.
Bill

Apr 17, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Marker light working but turn signal not blinking


make sure the bulb is grounded good . usually if the front one is lit and the signal is fast the rear bulb might be bad . turn on the side that is not working properly and take off the lense and wiggle the bulb. also you might have to gt under it and check for the ground for the bulb .. holler if ou need more Jerry

Feb 05, 2009 | 2000 Oldsmobile Intrigue

1 Answer

REMOVE CAR BATTERY


If you remove the Left front wheel there will be a little door by the bumper in the tire well if not on the left side of car look on the right side

Jan 12, 2009 | 2000 Oldsmobile Intrigue

2 Answers

Front right turn signal


i had a bad socket that was my problem on mine.

Dec 10, 2008 | 2000 Oldsmobile Intrigue

1 Answer

Front signal light Turn on but do not blink


try some electric contact lube in the light socket the leads may be corroded

Nov 18, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...