Question about 1999 Mercury Sable

3 Answers

No heat/99 mercury sable

I own a 99 mercury sable, and my blowers work but no heat. which fuse in the fuse box is the one that is for the heater? can anyone send me a diagram or let me know which one it is?

Posted by on

  • 3 more comments 
  • Anonymous Dec 07, 2008

    I have some heat when the fan is on low...turn it to high and the air cools down and so does the heater core outlet pipe. I'm thinking it's the thermostat or the heater core plugged

  • Anonymous Dec 09, 2008

    I have the exact same problem. I find though if I rev the engine
    it starts blowing hot for a very short time.

    I just flushed the heater core, not much improvement.
    any ideas ---???

  • Anonymous May 01, 2009

    99 Sable My heater only blows hot air. Can't adjust temp.

  • Anonymous Mar 15, 2014

    my windows wont work and the inside lite wont work when something in or around the fuse box on my 2001 mercury sable

  • Anonymous Mar 23, 2014

    fuse panel diagram

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

Its not a fuse if the blower motor works , you have a clogged or bad thermastat, bad water pump or your radiator heater core is clogged

Posted on Nov 25, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 38 Answers

It won't be the thermostat...Sable and Taurus have a design problem. The heater core hose going into heater core from water pump gets plugged up right at the heater core bypass junction. At Hardware store..Buy hard plastic hose/tubing about 4ft long that just fits inside of the heater core hose. My ACE hardware has white hard tubing. Cut one end of the hard tubing at angle to use it as a reamer inside the heater core hose. Now place the hard tubing on top of heater hose to measure the distance on hard tubing it has to travel up to firewall . Mark with black marker on hard tubing. Remove the heater core hose from top of water pump and slide hard tubing in hose all the way up to where the bypass connection is feeling the obstruction...rotating the hard tubing as you gently shove it thru heater core hose. Slide it back and forth and keep rotating it until you feel it go past the Bypass junction...10 min at least. Now take off the heater hose from engine on driver side that comes from the heater exit side...Use garden hose high pressure and back flush the crud out. Re connect hoses, add fluid to reservoir as needed. Or take to shop and have them do this. Many shops just back flush...Have them do BOTH! Buy the plastic tubing ahead of time so they have no excuse. I have been doing this on my 98 Taurus since 1999. Done many of these...You can also clamp off that bypass hose section with clamp or vice grips ..this will force all liquid to flow through heater core...remove clamp in spring! If you haven't changed thermostat for 4 years ...Change that as well. You tube has videos. Email me at davefudally@hotmail.com I promise you hot air...from the car!

Posted on Jan 02, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I replaced the pump and thermostat still no heat so last on list is the core clogged. has to be or get new car.

Posted on Oct 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My blower motor dosent work on my 2005 mercury sable


Probably your blower resistor switch (it's the part that gives you your fan speeds) is bad. You can test your blower by applying 12volts to it and see if it spins. The blower motor and resistor switch are both under/behind your glove box. Both should be easily accessible after removing panel above feet.

Oct 16, 2015 | 2005 Mercury Sable

1 Answer

1999 mercury sable heater not blowing hot or cold air


If no blower is running check for a bad fuse for the heater blower or a bad blower motor and or resistor or burned connector to the blower motor

Dec 04, 2014 | 1999 Mercury Sable

1 Answer

Wiring diagrams


Suggest you check fuses and relays in the fuse boxes first.

Use your browser and search for "2001 Mercury Sable Blower Wiring Diagrams"

Aug 17, 2014 | 2001 Mercury Sable

2 Answers

Heater blower not working


Joint box, are you sure?

Apr 02, 2014 | 1994 Mercury Tracer

1 Answer

2001 mercury grand marquis ac/heater blower doesnt work


You have to check all associated fuses and relays then check power at the blower motor resistor located under the hood on the passengers side on the heater a/c plenum against the firewall under the rear coolant hose going into the back of intake. ..do the tap test and see if blower cones on

Feb 14, 2014 | 2001 Mercury Sable

1 Answer

Heater blower won't come on


Could be the blower motor relay, the control panel on the dash, or the resistor.
You would need to check the blower motor for power and ground then work back to the fuse. I think the relay is in the box near the battery.

Feb 09, 2013 | 2000 Mercury Sable

1 Answer

1998 mercury sable fuse box location for the blower


Your fuse panel should be located below and to the left of the steering wheel, next to the brake pedal. For the blower, you want fuse 13. It should be a 5 amp fuse.

Dec 06, 2012 | 2002 Mercury Sable

1 Answer

Heater not working on 2002 mercury sable gs


first check the fuse to the blower motor. if good then it may be the blower motor may be bad it is under the dash on the passenger side. If that is good then it may be your heater core

Nov 30, 2010 | 2002 Mercury Sable

1 Answer

Where is the fuel pump relay located on the 99 mercury sable


there should be box uder the hood marked fuses, use the diagram on the back of the lid, to find out wich on it is.

Mar 22, 2010 | 2000 Mercury Sable

Not finding what you are looking for?
1999 Mercury Sable Logo

1,983 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

69014 Answers

Ron Lankford

Level 3 Expert

5383 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...