Question about 2008 Toyota 4Runner

2 Answers

Tire pressure warning light stays on all the time for no reason

I own a 2008 Toyota 4 runner and the tire pressure light came on and it stays on. My husband has checked the tire pressure and it is ok. What do you suggest that I do to get the warning light to go off?

Posted by on

  • Anonymous Mar 23, 2014

    planning to buy 4 new tires is it ok or advisable to buy 195/65/r15 for a more higher and smoother ride?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 60,792 Answers

The tire pressure monitor must be re-calibrated, this is a dealer only repair, no one else will touch it, these systems are very trouble prone.

Posted on Nov 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem with my 06 and 07 and now my 08 four runner. Most of the time your spare is low on pressure.This is hooked into the system and light will stay on for the spare as well.


Posted on Nov 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Lexus ES 350 low tire pressure warning light blinking


It seems to me you may need to replace the low pressure sensor located inside the rim.

Oct 03, 2016 | 2008 Lexus ES 350

1 Answer

Why does tire light stay on 2011 Toyota?


Reset the Tire pressure monitoring system light. The reset button is located under the steering side under the finish panel. You have to bend down to see the button.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON

Jul 23, 2014 | 2011 Toyota Highlander

1 Answer

Tyre Pressure and ABS


By operating the tire pressure warning system reset switch, tire pressure warning system ECU can be set to issue a warning at an inflation pressure that corresponds with the type of tires.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON. When starting the initialization, the tire pressure warning light blinks 3 times at 0.5 Hz.
During the initialization, the tire pressure warning system valve & transmitter measures the inflation
pressure of the tires, and registers the signals that are transmitted into the ECU at a frequency of 1 per
minute. The initialization process is completed when the signals from the tires have been received.
Once the tire pressure warning system reset switch has been pressed, do not turn the Ignition switch OFF for a few minutes.

Mar 05, 2014 | 2002 Toyota Corolla

2 Answers

TPM light stays on. All 4 tires have 26 lbs of air. What is recommended tire pressure?


32 psi is the usual recommended pressure but you may have to fill the tires to 35 psi to make the TPM system reset. That's how most systems recognize that you have serviced the tires. Most TPM systems will indicate low tire pressure around 26-28 psi.

Jan 17, 2011 | 2008 Toyota RAV4

2 Answers

2004 4 runner: Low tire pressure warning light is on, even though there is no tire pressure issue. Is this a sensor problem? or maybe the light is not working?


the senors tell you if the tire is low or even if the tire is not low if the tires are off a couple pounds from each other then the light will come on.

Dec 07, 2010 | 2004 Toyota 4Runner

1 Answer

My child away at college, has a Rav4, 2008 with a warning light on that looks like "tire tread?" Just had the oil changed 2 weeks ago, so shouldn't have anything to do with that. Sound familiar?...


That symbol (tire tread) could mean a low tire pressure. The majority of vehicles today have the low tire pressure warning system, which indicates that one or more of the tires are below the minimum tire pressure. Have the tire pressure checked in each tire. As for turning the warning light off, some vehicles the light will go out after tires are inflated properly. Have them check the owner's manual for resetting warning light. Please inform me as to whether or not it was the tires...thanks.

Nov 14, 2010 | 2008 Toyota RAV4

1 Answer

2008 Camry 4cyl tire pressure warning light on!!!!!!!!


Hello.

Do you have a full-size spare tire? If so, it too is checked via the Tire Pressure Warning System. Perhaps it is low, this is quite commonly omitted when setting tire pressures. If you have a temporary spare tire, it is not checked. If you have no full-size spare, one of the TWPS sensors may have been damaged by your tire changer. This can happen very easily, if the changer is not careful whilst dis-mounting the tires. A Toyota dealership has a special service tool that will check each of the sensors for output, while on the car. If a sensor is found to be bad, the tester will find it.

Dec 02, 2009 | 2008 Toyota Camry

2 Answers

DEASH LIGHT LOOKS LIKE A TIRE WITH ! IN CENTER


Low tire pressure warning. 2007 and up vehicles have a TPMS (Tire Pressure Monitoring System). Refer to your owners manual.

Sep 30, 2009 | 2008 Toyota Tacoma

1 Answer

Changed right front tire now reads zero on dash light is on


Your tire pressure monitor needs to be reset whenever you change or rotate your tires...

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 24, 2009 | 2008 Chevrolet Tahoe

3 Answers

The check tire pressure light and ABS auto traction sensor light keep coming on. Tire pressure is good


The tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You should be able to re-initialize the system by following these steps:

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 11, 2009 | 2004 Cadillac Deville

Not finding what you are looking for?
Cars & Trucks Logo

622 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...