Question about 1990 Nissan Pulsar

1 Answer

Need to program remote keyless entry for 2003 nissan pulsar?

The old remote stopped working so we have purchased a new one and now need to program it

Posted by on

  • 1 more comment 
  • danksamlotbr Nov 25, 2008

    it is a 2003 model nissan pulsar

  • yadayada
    yadayada May 11, 2010

    What model and year is the car, not a 1990 nissan Pulsar I assume?

  • Anonymous Mar 21, 2014

    need to program new remote

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Nissan Expert
  • 99 Answers

If it is a 2003 model year vehicle follow this procedure. If it doesn't work, you may have the wrong fob which happens all the time.

Sit in vehicle and close all doors.
COMPLETELY insert and remove ignition key more than six times within 10 seconds.
Hazard lights should flash twice.
Turn ignition to ACC position
Press and hold any button on the new key fob hazard lights will flash twice
For a second key fob using the master lock switch, lock and unlock the doors then hold down any button on the second remote until the hazard lamps flash twice.
Then you are done open the door to exit the programming mode.
If the lamps didn't flash when holding down the key fob make sure you have the right key fob, they are different for each car.

Posted on Nov 26, 2008

  • Robbie Rector
    Robbie Rector Feb 21, 2014

    The parts store were I purchased the new remotes programmed them with their computer and. Still didn't work. I checked. The fuses. And all were good. Is there a receiver in the dash that could. Go bad?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lastyear i wreck my 2005 nissan altima, i still have the keyless remote part but not the ignition key, now i have a 2004 nissan altima but no remote are they compatible


Call Nissan they have to program your old keyless remote to your new cars ECU. Unless your a computer wiz you can do so research and get the program to do it yourself. Call Nissan first.

Mar 07, 2016 | Nissan Cars & Trucks

1 Answer

How to program keyless entry remote for buick lacrosse?


I own a 2007 Buick Lacrosse, but I imported it to Paraguay, South America. Now I bought a new Engine Start Keyless Entry Remote from Amazon, but here we do not have any GM dealer to program the unit.
I really need help to program the keyless remote control, I will appreciate very much your help.

Jan 02, 2012 | 2005 Buick LaCrosse

1 Answer

Have verified that my newly purchased 03 kia sorento has remote keyless entry, but professional locksmith cannot get new remote to program. Remote is Bontec T009, pretty sure it is correct one. Could it be...


Yes the 03 and up sorento has a keyless remote entry, You do not need to reset the ECU, you however need to reprogram the remote trasmitter to your car so they communicate, otherwise it will never work if you do not program it. You will need to take this to a kia dealership with the remote transmitter. They may or may not charge you for a fee. However I did had a remote, and it became damaged when my kid drop it in the fish tank. I was able to get it done at the dealship, 35 for the remote, and 50 for service fee. I did however found some link referal to manually do it yourself, Please check this forum out http://www.kia-forums.com/2003-2010-sorento-forum/34549-remote-keyless-entry.html. For me, I did not bother, because I did not want to take the chance to mess up something else.

Jan 28, 2011 | 2003 Kia Sorento

1 Answer

Keyless remote stopped working, I replaced battery


The 1997 to 2003 Dodge Caravan and Grand Caravan use a standard key and remote setup with a separate remote fob. However, the 2004 to 2009 Dodge Caravan and Grand Caravan use a combination key and remote on one device. To program a new keyless entry remote for the 1997 to 2003 Dodge Caravan, you must have at least one functional remote, which is required to enter synchronization mode. To program the combination key for the 2004 to 2009 Dodge Caravan, you must have two functional combination keys. If you do not, you'll need to see an authorized Dodge dealer for keyless entry programming assistance.


2004 to 2009 Caravan Programming Instructions
  1. Insert one of your working combination keys into the ignition. Turn it to "On"; leave it in this position for about 10 seconds but no longer than 15 seconds. Turn it to "Off" and remove it.
  2. Insert your second working combination key into the ignition within 15 seconds of removing the previous key. Turn it to "On". After 10 seconds, you'll hear a chime and the "Theft" light will begin to flash, entering synchronization mode. Turn the key to "Off" and remove it.
  3. Insert the combination key you want to program. Turn it to "On." After 10 seconds, you'll hear a chime; then the "Theft" light will turn off. When the light turns off, the combination key--including the key and the remote--is programmed.
  4. Repeat Step Three for each combination key you want to program. A total of eight can be programmed.
Hope this help (remember comment and rated).


May 08, 2010 | 2008 Dodge Grand Caravan

1 Answer

Keyless Entry For 2003 Grand Am 2.2L 5 speed manual


the mechanic should be able to let you know what is the problem and what it takes to get it to work.
if the car was not equipted with the keyless entry and the dealer tried to sell you the remotes then you need to return the remotes.
by running the VIN on their computer, the dealer can tell you if you have it or not.
if I was you, I would just get a remote starting system from best buy or sam's then either have them install or have a good mechanic to install the system. it may be cheaper too!

Mar 22, 2010 | 2003 Pontiac Grand Am

2 Answers

Purchased used. have remote for keyless remote.


That you need to take it to a car stereo dealer that install NEW keyless entry's...Sorry, thats the easiest way to fix this issue.

Jun 14, 2009 | 1999 GMC Jimmy

2 Answers

How do I program a replacement keyless entry transmitter?


I have a 2003 dodge durango i dont have a working keyless remote how do i program one to kork.

Jun 07, 2009 | 2003 Dodge Durango

1 Answer

Instructions for programming a 2003 Buick La Sabre Keyless Remote


fifty is cheap and should pay it because no else can program the remote because it must be done through the computer.

Mar 24, 2009 | 2003 Buick LeSabre

2 Answers

My remote for the keyless entry does not work.


does trunk button work? panic button?
here's 2003 info:


  • The doors do not lock/unlock using the remote transmitter
  • Remote transmitter.
  • Driver door module (DDM).
  • Go To Pinpoint Test G .

SECTION 501-14: Handles, Locks, Latches and Entry Systems 2003 Town Car Workshop Manual
GENERAL PROCEDURES Remote Transmitter Programming
  1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming that the program mode has been entered.
  1. NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
    Press any button on the transmitter to be programmed.
  1. If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
  1. To exit program mode, turn the ignition to START or wait 7.5 seconds.
--------------------------------------------------------------
report back

Mar 22, 2009 | 2004 Lincoln LS

Not finding what you are looking for?

Open Questions:

See all 1990 Nissan Pulsar Questions

1990 Nissan Pulsar Logo

3,565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...