Question about 1993 Ford Taurus
Actually, if you go to your local salvage/junkyard, you will probably find them at lot easier and cheaper that going to the dealership to order them, which is probably the only other place you'll be able to obtain them. In fact, many times a junkyard will give you a part that is that "insignificant" (to them, I mean). I wouldn't think that they'd charge your much more than $5 for them though. Hope this proves to be of use and have a great evening!
Posted on Nov 25, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 03, 2011 | Chevrolet Express Cars & Trucks
Dec 01, 2010 | 2002 Ford Taurus
Turn the drain valve at the bottom of the radiator counterclockwise to drain the coolant from your Ford Taurus into a suitable container. Depending on the size of the container, it may be necessary to lift the front end of your Taurus with a jack and lower it onto jack stands, or use wheel ramps.
Follow the upper radiator hose to the point where it meets the thermostat housing at the front of the intake manifold. Loosen the hose clamp and pull the radiator hose off the water connection on the thermostat housing.
Take out the two bolts on the thermostat housing cover with a 13mm socket or wrench and remove the cover. Clean any old gasket residue from the inside of the thermostat housing cover. Pull out the old thermostat.
Insert the new thermostat into the thermostat housing with the spring-side facing into the engine. Install the new thermostat gasket. Use a spray adhesive to hold the gasket in place, if desired.
Reinstall the thermostat housing cover. Tighten the bolts to 89-124 in. lbs. Reattach the upper radiator hose to the thermostat housing. Make sure the drain valve on the radiator is closed.
Fill the radiator with new or reserve coolant. Start your Ford Taurus and allow it to warm up to its normal operating temperature. Check hoses and connections for leaks and tighten hose clamps to stop any leaks, if necessary. Add more coolant as needed.
Oct 23, 2010 | 1999 Ford Taurus
Jun 05, 2010 | 1999 Ford Taurus
Mar 31, 2009 | 1993 Ford Taurus
Dec 12, 2008 | 1999 Ford Taurus
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: