Question about 2003 Nissan Sentra

1 Answer

Hello Hi, my 2003 nissan sentra just died while I was driving it and it has the p0335 code, I had a fuel pump/sensor error code for awhile and ignored it :( now this happens. do you think my problem could be related to the fuel pump/sensor and crank angle sensor, or just the sensor. And could you tell me where on my car thats located? Thank You!!!

Posted by on

  • Anonymous Mar 27, 2014

    Could you please tell me where this sensor is located and if possible where I might find some downloadable diagrams for this and other sensor related issues for my Hyundai. I have a feeling I'm going to need them. I have had my car diagnosed today after it broke down and this code was listed so, now I must determine where this sensor is and who to fix it...thanks!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Nissan Expert
  • 99 Answers

After the new sensors are installed and the code still comes back, replace the timing chain. They have been known to stretch and cause the P0335 code on these engines.

Posted on Nov 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got an error code P0335 on a 2005 Nissan Sentra 1.8L, what is wrong with it? How can I fix it?


code p0335 refers to crankshaft position sensor ( CKP)-circuit malfunction === causes --wiring---CKP sensor---ECM Replace the sensor.

Sep 28, 2013 | 2003 Mazda Mazda6

1 Answer

Hello I have a 2005 Nissan Sentra S that recently started cuttting off while I'm driving. I mtook my car to Auto Zone where I was giving a code off p0335. i replaced the crankshaft sensor and the


need to replace the camshaft sensor also in tandem w/crankshaft sensor. trouble codes need to be removed from computer. after repair. both the air & fuel filters need replaced. how's your oil change doin ? try this brandi, see if that takes care of it .

Feb 25, 2013 | 2005 Nissan Sentra

1 Answer

Hello I have a 2005 Nissian Sentra S it has recently started cutting off while I'm driving . I took the car to Auto Zone where I was given a code of P0335 which was a crank shaft sensor. I replac


Unfortunately, replacing a sensor only fixes the problem about half the time. The code means the computer is not getting a signal from the sensor, not that the sensor has failed.
The problem could be in the wiring, or the part that the sensor gets the signal from.

Feb 25, 2013 | 2005 Nissan Sentra

1 Answer

My 2003 Nissan Sentra died while I was driving on the freeway. I was able to start it but it died again the following day and it will start anymore. I was reading the forum and suggest that it's the fuel...


disconnect the fuel line at the fuel filter or the fuel rail which ever is easier to get too, then try to start the car if it sprays fuel it is not the pump if it does not then you know it is the pump.

May 03, 2011 | 2003 Nissan Sentra

2 Answers

I have a 2003 Nissan Sentra SE-R and the engine keeps sputtering while i am driving and the diagnostic pulled the P0335 code indicating that my CKP is malfunctioning but i just replaced it and it is doing...


Note - not a solution..just adding my woes!
I drive a 2003 Nissan Sentra SE-R Spec V.
My car suddenly stalled 1 day and the engine wouldn\'t turn over. Brought it to my mechanic and had the Camshaft position sensor replaced by my mechanic. The car ran fine for about 2 weeks and then the light was back on with the initial symptoms.

Took the car into the dealership and they diagnosed it again as P0335. Said that the mechanic hadn\'t installed the sensor correctly. Charged me a bunch of money to replace the thing and not too long ago the check engine light is on. The Revs bounce around everywhere. Checked the code again and it\'s P0335 yet again! Am in talks with the dealership to get to the bottom of this...

Apr 19, 2010 | 2003 Nissan Sentra

1 Answer

2004 Nissan Sentra 1.8S that stopped running, it threw code P0335 (Crankshaft Position Sensor) which I replaced; the CEL will not go out, and I was wondering if the CEL must be cleared using a handheld...


should shut off after 40 unfaulted key cycles or with battery un hooked for half hour if runs good dont be scared to drive it that wont hurt it at all

Jul 17, 2009 | 2004 Nissan Sentra

1 Answer

P0335 CRANK POSITION SENSOR A CIRCUIT MALFUNTION


crank sensors are usually located in/near the distributor.

Jun 07, 2009 | 2003 Nissan Sentra

2 Answers

2003 sentra 1.8 while hot car stalls


I can tell you what code p0335 is :
Turbocharger Boost Sensor A Circuit Malfunction.

Oct 23, 2008 | 2003 Nissan Sentra

Not finding what you are looking for?
2003 Nissan Sentra Logo

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...