Question about 2003 GMC Yukon Denali
I have opened the Fuse Box under the hood on the drivers side, looked under the cover at the schematic, and I can't tell which fuse is for the rear lift gate. I really don't want to go in blindly and checking all the fuses. Is there some sort of verbage I should be looking for? Am looking in the right place?
Fuse # 105- 40Amp Power liftgate module, Power
liftgate motors, Power running
Here is a link to your factory owners manual in PDF file format:
Posted on Oct 21, 2008
Check on the Strut Assembies on Each side of the Door. There should be a Safety device on them that will allow you to keep the door up, They could be Catching at the Open Position.
Posted on Jan 12, 2009
SOURCE: The liftgate will not stay open. There is fluid showing below the support cylinder on the drivers side. I believe the cylinders are shot and need instructions on replacing ford freestyle lift gate sup
for the most part there are small clips top and bottom of the cylinders use a small screw driver and pry the clips out and remove be sure to put a broom handle under the hatch or have someone to hold it up why you are replaceing them so the lift gate does not fall on you.
Posted on Apr 20, 2009
Tips for a great answer:
Dec 22, 2015 | 2005 GMC Yukon XL
Jul 25, 2015 | Cars & Trucks
May 03, 2014 | 2005 GMC Yukon Xl Denali
Sep 02, 2011 | 2006 GMC Yukon
There are two fuse boxes on a 2003 GMC Yukon XL.
One is on the drivers side of the instrument panel. It will be visible when you open the drivers door. Remove the cover and you will locate several fuses.
The other fuse box is in the engine compartment. When you open the hood, there will be a fuse box on the right hand side of the engine.
The lighter fuse is located in the car . It should be marked 20A and its location should be designated by the schematic in the cover of the fuse box.
Feb 19, 2011 | 2003 GMC Yukon XL
Dec 10, 2009 | 2003 GMC Yukon XL
Aug 03, 2009 | 2005 GMC Yukon Xl Denali
Jun 21, 2009 | 2005 GMC Yukon Xl Denali
Jan 06, 2009 | 2005 GMC Yukon Xl Denali
676 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: