Question about 2006 Chevrolet Equinox

1 Answer

Changing headlight I need to know how do you get to the head light to change it on the drivers side?

Posted by on

  • Anonymous Feb 10, 2009

    Same problem! My driver's side headlight went out. I'll tell my husband to refer to the manual. Thanks!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

There is an entire section in the Manual as to how to change the headlights. It involves dismantling the grill of the car. There are about six black pegs that need to be pulled out that attach the grill to the car. Pull the grill up and towards you. The silver trim that the Chevy emblem is on will pop off. Then on each light there are two screws that need to be removed on the top, and one hex screw on the side about half-way down the light. You can then pull the light up and out towards you to change the bulb.

Posted on Dec 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change the front driver side light bulb in a 03 Suzuki Grand Vitara 1.6?


Danielle, On the driver side you may have stuff in the way, which may have to be removed, to change bulb. Sometimes it is easier to remove headlight then change bulb and reassemble. Videos attached make it look fairly easy to change he bulb with out removal of headlight.
Check the attached links,instruction and guides, Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Suzuki Grand Vitara Headlight Bulb Replacement
Headlight Change 1999 2005 Suzuki Grand Vitara 2003 Suzuki Grand Vitara 2...
Auto Repair Maintenance How to Replace Headlight Bulbs
How to replace Suzuki Grand Vitara Tail Light Bulb


Jul 03, 2016 | 2003 Suzuki Grand Vitara

2 Answers

Head light have low but when using high does not work just on one side drivers side


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Dec 20, 2015 | 2004 Nissan Sentra

1 Answer

Drivers side head light is way dimmer than passenager light even after new bulb replacement


When looking from the outside of the headlight at the bulb, can you see the bulb clearly??
These lenses are notorious for dulling very badly. If it has you can use a regular headlight 'restoring' kit sold at most auto part locations.

If it is not a lens issue, you may have a wiring/supply issue.
Then you would need to find the troublesome wire/connection.
I am not the best at wiring issues, but I would try to find a power source wire with the same amperage rating, run a bypass jumper from a known good voltage source and see if the light changes. If no change, your problem may be the harness or plug at the rear of the headlight bulb.
Hope I could help
GL

Dec 31, 2011 | 1999 Plymouth Voyager

1 Answer

My head lights only work on high beams. I asked the parts store about a head light relay and they said there was no listing for that switch. whats wrong?


According to Autozone you will find the Headlight relay "Under hood, driver side, front engine area, driver side of headlight housing, mounted on fenderwell"
Once you find the relay, with the engine off - turn on the lights and have someone change them from high to low and back a few times - if the relay is working you should be able to hear it clicking as it changes. If you do not hear it clicking remove the relay - take it to your parts store and they should be able to find a reaplacement

Jul 29, 2010 | 1993 Ford Festiva

2 Answers

How to change the headlight on a honda civic si, need to change the light bulb, but can not get the headlight off.


It's been awhile since I've dealt with that particular model, but similiar models that were close to the same year didn't require the removal of the headlight. Access to change the bulb was obtained from the rear of headlight by squeezing clips together and turning at the same time counterclockwise (don't know how much access you'll have though on battery side). After that locking plastic holder is removed (assuming already unplugged b4 turning that is) slightly turn with minimal effort and should come right out.

Apr 09, 2009 | 1998 Honda Civic

3 Answers

Side light bulb change on hyundai terracan


hi there
the solution is simple,
you only need to undo the screw on top of the side light/indicator. then facing the head light place a flat headed screw driver under the bottom lip of side light. the bottom of the lihgt is on a small push fit stud, use a sponge or cloth to protect your bumper paint work then just apply pressure gently to lever side light out towards you, It will come dont worry, you may then change your bulbs if you wish remove the whole light unit you will see the bottom bolt as soon as you release the side light. to replace just push back into place then replace screw. whole job takes about five minutes

hope this helps kevan hildred

Nov 23, 2008 | 2003 Hyundai Tucson

1 Answer

Driver's side head light


There is 2 plastic clips behind the headlight, lift these up and pull the headlight out. Then just twist the plastic cap out of the headlight and replace. (Do not touch the bulb when replacing). Then put headlight back in all the way and slide the plastic retainer clips back into position.

Sep 23, 2008 | 1999 Pontiac Grand Prix

2 Answers

Changed passenger side headlight bulb, now unable to adjust or align head lights


Changing the bulb should not have affected the housing adjustments.

The bulb is just inserted into the headlight housing. The adjustments on the headlight housing is what adjusts the alignment of the headlights.

Did you maybe not get the bulb not seated correctly in the socket? Or didn't get the socket not seated correctly into the housing?

Aug 12, 2008 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...