a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I own a 2007 Buick Lacrosse, but I imported it to Paraguay, South America. Now I bought a new Engine Start Keyless Entry Remote from Amazon, but here we do not have any GM dealer to program the unit.
I really need help to program the keyless remote control, I will appreciate very much your help.
There is no way manually program a keyless remote to this vehicle. This vehicle requires special equipment be connected to the vehicle diagnostic port to program the remote into the keyless entry module. Sorry many new cars are this way.
1.Insert keys in ignition and leave in the OFF position. 2.Locate the OBDIIPort under drivers side dashboard. (Note port is wider at top) Your OBDII Port will not have numbers, use this for reference.
3.Make sure there are metal contact pins in terminals 8 and 4. Connect 8 and 4 with a suitable jumper wire (leave the jumper wire connected throughout the programming procedure).Make sure you know which terminals are 8 and 4. The vehicle will respond by locking then unlocking the doors to signify entering of programming mode. 4. Close Doors 5.Turn ignition to the ON position (as far as you can go without cranking the engine). Doors will lock.
6.Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be programmed. Up to about 30 seconds, the vehicle will respond by locking then unlocking the doors. Release the buttons on the transmitter. 7.Within one minute, repeat the previous step on the remaining transmitter (if any – including any existing remotes). 8. Remove jumper wire applied to the OBDIIPort