Question about 1993 Jeep Grand Cherokee

1 Answer

Can not shift into four wheel drive - 1993 Jeep Grand Cherokee

Posted by on

  • darin brown May 11, 2010

    what type of system is it / quadratrack, quadratrack ll, also is it a button or lever used to engage 4wd

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had a similar problem, shift handle wouldn't pull back into 4WD. You'll have to get under the car (safely of course) and locate the the transfer case shift lever which will be directly below the shift lever assembly inside the car..You'll see some rods, trunnions and some brackets which probably will be dirty, rusty etc. Clean them up the best you can then douse everything with WD 40. Keep trying to pull the inside shift lever into 4WD untill the WD40 starts working. It may take a while but it'll work.

Posted on Nov 25, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 f350. Ford will not go into 4wheel


Which 4X4 system does yours have ?
Four-Wheel Drive Systems The mechanical-shift 4-wheel drive system consists of the following components:
  • Transfer case (For transfer case repair procedures, refer to Section 308-07B ).
  • Transfer case shift lever
  • Manual locking hubs
  • 4x4 indicators
  • Shift linkage (hub locks)
The electronic-shift, 4-wheel drive system consists of the following components:
  • Transfer case (For transfer case repair procedures, refer to Section 308-07B ).
  • Four-wheel drive (4WD) control module (For 4WD control module installation, refer to 4WD control module in this section.)
  • Mode select switch (MSS)
  • Gearmotor encoder assembly
  • Automatic locking hubs (hub locks)
  • Pulse vacuum hub lock (PVH) solenoid and vacuum lines

Jan 11, 2018 | Ford Cars & Trucks

1 Answer

My truck is stuck in four wheel drive


At the risk of going to the offensive, sometimes it's the simplest thing - you ARE putting it in neutral, at a stop, engine running, with the brake pedal pressed, when trying to shift out of 4wd, yes?

2) Check for blown fuse for 4x4 shift module

3)This sounds dumm, but worked on my wife 99. I took it to a school parking lot, put it in reverse, floored it and pulled on the lever and it popped out of 4x4

4) The shift motor is bad. Replace it.

Hope this helps.

Feb 18, 2015 | 1999 Ford Expedition

1 Answer

1995 jeep grand cherokee grinds when shifting into full time four wheel drive. What gear should the transmission be in when shifting four wheel drive?


Try neutral. or in drive, but just crawling. Give light pressure to the stick and sort of let it just fall into 4x4

Jan 08, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Shift into four wheel drive and nothing happens light says its in four wheel drive only back two tires work


Check for a vacuum leak under the hood. The four wheel drive front hubs are accuated by vacuum.

Dec 09, 2009 | 1999 Kia Sportage

1 Answer

Four Wheel drive not working. Blows fuses.


Hi:
Your four wheel drive push button system has only 3 components, so there is a way to narrow down what is blowing the fuse:

the system includes the push button panel and indicator light, the shift control module, and the shift control motor.

The shift control motor is the only part that can draw enough current to blow the fuse. If for some reason the transfer case is jambed up, that could blow the fuse too...So if you are planning on attempting repair yourself:

first, unplug the connector off of the shift control motor, and see if the fuse still blows.. if not, then remove the shift control motor from the side of the transfer case and plug it back in to the harness and see if the fuse blows. If so, then the shift control motor is bad, if the fuse doesnt blow then you need to check out your transfer case.

Dec 08, 2009 | 2000 Chevrolet Blazer

2 Answers

4x4 in working


try reversing six to eight feet after shifting into 4WD. PLEASE RATE MY ANSWER.

Feb 26, 2009 | 2000 GMC New Sierra 1500

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1993 Jeep Grand Cherokee Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...