Question about 2003 Toyota Sequoia

1 Answer

Oil Pressure Not wanting to step on you, the issue with the Sequoia is really fixed by replacing the printed circuit board behind the inst cluster, thusly replacing the combination meter ECU. If you want, please comment back to the Client, he needs P/N 83291-0C012-RP if he desires a permanent repair... BTW...The "Experts not seeing comments is being looked into".

Posted by on

  • Toyota Ed Nov 24, 2008

    I'm not here to step on true experts. The BSers, yes indeed. You, nope.

    I hold you with a very high regard. I just wanted to get my BTW to you, (off of the lounge) and the Toyota Q caught my eye.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 19,396 Answers

Sure, Thanks Ed,

I just reported something that I knew, I will report the right solution to the user,

If you see that I write imprecisions feel free to post your comment in my solutions,

I will report your comment to the user.

Posted on Nov 24, 2008

  • Ginko
    Ginko Nov 24, 2008

    Well, I am not a mechanic, I give free advice on what I think I know, more than a correction it was a top up, I told the user that the gauge can be faulty, sure I did not know control module details and PN.

    The important think is that experts post solutions only when they think they can contribute, and not just to leave a comment.



×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No oil pressure on dash gauge with engine not running scanner shows 100 psi have good gound good 5volt refernce voltage any ideas


Intstrument cluster printed circuit board. They are famous for crapping out. Replace instrument cluster.

Dec 14, 2010 | Dodge Ram 2500 Cars & Trucks

2 Answers

Was driving last night notice oil pressure drop to 0 . Check the oil this morning it is fine and the gauge is reading 40. What can be the problem


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Tahoe instrument cluster repair

Sep 06, 2010 | 2005 Chevrolet Tahoe

2 Answers

Fuel gauge and oil pressure gauge dont work on my 2005 chevy tailblazer


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Trailblazer instrument cluster repair

Sep 02, 2010 | 2005 Chevrolet TrailBlazer

2 Answers

Oil light flickers when in idle. Oil on dip stick measures fine.


install a mechanical guage to test the actual pressure, if its fine the sending unit is faulty, if nor remove the oil pan and check the oil pickup for blockage,

May 24, 2010 | 1999 Chrysler Concorde

1 Answer

2003 sequoia,The oil pressure gauge reads low and floats around. I had an earlier sequoia that the sending unit was replaced for the same problem. Is there a SSC on this problem?


There is no Special Service Campaign on that issue. There is, however, a TSB on that issue, and the fix is to replace the sending unit and the gauge.

Nov 09, 2009 | 2003 Toyota Sequoia

1 Answer

02 jeep grand cherokee 4.7 eng


Hook up a manifold gauge (mechanical temporary use gauge, used by mechanics) and test the oil pressure. You probably need to replace the gauge. The computer sends info through a printed circuit board behind gauge cluster and sometimes you have to replace the whole gauge cluster.

Feb 05, 2009 | Daewoo Leganza Cars & Trucks

3 Answers

Inst cluster 1994 Linc Cont Exe 3.8 Is this a mechanal oil pump


i had the exact same problem with dcm and oil and this is a sure way to resolve it. disassemble the dash and get to the wires in the back of the gadges. disconnect and clean connections. i had the beeping six to ten times a day and ithis fix it.

Jan 28, 2009 | 1994 Lincoln Continental

1 Answer

2002 Chevy Trailblazer Oil Pressure


Common issue on teh 03-06 Trailblazer instrument clusters, it's caused by failing stepper motors on the cluster's circuit board. It is fixable, check out this page for more on how to get it fixed - Trailblazer oil gauge broken

Nov 23, 2008 | 2002 Chevrolet Trailblazer Ext

4 Answers

Its a 2000 lancer


the problem will more than likely be the printed circuit board on the back of the instrument cluster. to remove this lower the steering wheel to its lowest position. there are 2 phillip head screw in the top of the surround remove these and pull surround out. there are 4 screw ,2 top and 2 bottom which hold the instrument cluster in place.remove and then pull the cluster toward you and out. I found the crack in mine to be on the long turn over section which turned out to be between the oil warning light and the hand brake warning light which in my case stopped working along with the tacho and speedo. I repaired the crack by scrapping off the lacquer coating and repairing the track with a circuitworks Conductive Pen - Micro Tip made by chemtronics and purchased from **** smiths ( fairly dear though aprox $40 ).

Oct 17, 2008 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2003 Toyota Sequoia Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...