Question about 1986 Toyota Pickup 4WD

1 Answer

Lost keys to 1986 toyota pick-up. can't find locksmith with equipment that will work. Mechanic says too difficult to take off lock cylinder. hotwire, but stearing column will still be locked. Any other ideas?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 86 Answers

Cheapest way would be to really look for a locksmith that can either reproduce your original keys manually(handmade) or through machine that can regenerate your original keys otherwise you'll have to replace new sets of door keys locking mechanism and new set of ignition switch that may be adopted to your steering columns locking devices.

Posted on Nov 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to start a Ford Contour with out my key


Probably can't be done if it is late enough to be fitted with a security system. In that case the key will have a coded transponder which the system will recognise and send a signal the the engine management to switch it on.

You either need a correctly coded key or remove the engine ECU and have it decoded.

Jan 23, 2016 | Ford Cars & Trucks

2 Answers

I lost my keys and would like to know how i can get my 96 Volkswagen golf 2.0 hotwired or started


Hi it will be very difficult to get around the immobiliser circut to get it started try main try find an auto lock man he will make a new key or go to main dealer for new key. Good luck.

Apr 14, 2015 | Volkswagen Cars & Trucks

1 Answer

Key broke in the ignition lock


Hello! The only way to get it out without removing the lock cylinder is to pry it out with a dental pick....If that doesn't work, you'll have to remove the lock cylinder and take it to a locksmith or purchase a new cylinder/key...Locksmith may cost around $50 to remove the remainder of the key...Guru...Saailer

Nov 04, 2011 | 2007 Chevrolet Aveo Sedan

1 Answer

I lost my key to my 2000 corolla hatchback, had keys cut with the chip but not the security or central locking how do I now fix the problem


You have to visit either Toyota or a suitably equipped automotive locksmith/electrician to get the new chipped key to work with the car security system.

There's no DIY workaround.

Feb 16, 2011 | Toyota Corolla Cars & Trucks

1 Answer

I lost my key i can start but can not turn the wheel how can i take oof the key cylinder


you can contact a toyota dealer and have them make a key. otherwise it would be better to contact a locksmith. there is alot of work involved when trying to remove a lock cylinder without a key

Apr 21, 2010 | 1991 Toyota Camry

2 Answers

In my 1992 toyota celica, the key wont turn


I've had the same problem with a few older Toyotas. Most likely you need to take your ignition lock cylinder to a qualified locksmith and have it overhauled. Another option is to purchase an all new lock cylinder, but then unless you don't mind having a different key for the ignition, you would have to take the new cylinder to the locksmith to get it re-keyed to match the other locks on the car. Look for a locksmith with a AAA certification. You can order a new cylinder at a reasonable price from sellers on eBay or from www.rockauto.com.

Removing the cylinder is not too difficult - refer to your car's service manual for complete details. Basically you will need to remove the trim panel covering the lock, undo the fastener bolts/screws, and then usually there is a tab on the underside of the cylinder that you will need to push in in order to slide the cylinder out. The catch is that you will need to get the key into the ACC position in order to pull out the cylinder.

Good luck and let me know if you have any questions.

Apr 11, 2010 | 1992 Toyota Celica

1 Answer

How do I remove and install ignition switch cylinder for a 2000 Cadillac Eldorado


Your famililer with this job or can have someone thats done it before show you as the security system is involved and mistakes will make the car never start again, without real intervention. A professioanl locksmith will save you lots of money by just not failing the first time. The lock cylinder has a key reader that electronally (reads) the key and if your key is missing a dealer or well equiped locksmith with reprogramming experience, is required. May dealers call in a locksmith or a roving mechanic that performs this function as it's a highly specialized proceture.

Dec 21, 2009 | 2000 Cadillac Eldorado

1 Answer

Changing ignition key switch


Well,

From what I remember you need to put the missing key in and then press the cylinder release, a small hole by the ignition switch. Without the key, I guess you would need a locksmith to turn the tumbler then press the switch. Lock pick set anyone?

Jul 18, 2008 | 1986 Chevrolet Caprice

1 Answer

Ignition


Sadly even if you hotwired it you wouldnt be able to drive it far. The steering wheel would lock up and you wouldnt be able to turn. However you can call a locksmith who can cut you a new key usually right in your own driveway. Normally they dont charge that much as long as you dont ask them to come over at this very second.

Jun 27, 2008 | 1991 Mercury Tracer

Not finding what you are looking for?
Cars & Trucks Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...