Question about 1992 Honda Civic

2 Answers

Driver side power window shot

Figuring it was the most-used toggle that was the problem I got another door control unit. No luck. Examined the wiring and connectors looking for shorts, no evidence visible. Pulled the window motor and had it tested, works fine. What's next? Haven't checked the fuse box because the other 3 windows work fine.

Posted by on

  • lrebbin Nov 25, 2008

    Him ,ine start ok and gradually grinds to a halt whne its half open. I assumed that this would be a tired motor or siezed up linkages.


    I haven't pulled it apart as I expect I'll end up killing it altogether!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Whats your email address i would send a wiring diagram

Posted on Feb 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

Sometimes on older models, the wiring between the door and the pillars is broken,

Pull the rubber cover over the wiring between the door and the pillar and inspect for broken wires. Even if you had power to the motor, when you close the door, there’s a possibility that the broken wire moves and losses connectivity

Let me know, Pierre ( Montreal )

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Follow me here: The driver side passenger window will go up and down while operated independently with the switch on its door. However, the driver seat master switch will not control window to go down


Not following you completely.
When you say driver side passenger window, you mean the driver side rear window ?
The window motors get power thru a power window control unit and thru the driver master switch.
You'll need a shop manual with the wiring diagrams to track down the problem.

Feb 27, 2013 | 2005 Honda Pilot

1 Answer

On driver side and rear side on driver side, both doors will not lock and unlock when use remote key. How can I fix the power lock to lock and unlock?


If the door locks by using the door switch the fault is with the master control unit. So there is a link failure from the master control to the sub units in the door, it can be a break in the wiring harness in the door hinges as this remote trigger can be lost on the driver side and which goes parallel to the rear side.
remove the panel and check the lines, compare to the other side to find the missing line - open wire. You can loop or wire a new connection from the open section.

Sep 17, 2011 | 2008 Toyota Camry

1 Answer

My driver side power window is stuck in the down position is there a way to get it closed? The toggle doesn't work but the rest of the toggles for locks pass window and power mirrors do


Remove the door panel,and the wire connector for the power window motor. Check to see if power is there when pressing the window switch. Check both wires, one for up and one for down. If power is present then its your window motor, if not your switch or power source. Good luck

Aug 12, 2010 | 2000 Chevrolet Venture

2 Answers

My doors are one by one failing nothing seems to work on the door the lock or window both rear doors 2001 passat glx


First, check the fuses. They are on the side of the dash...open driver door all the way, and pop open cover with a scewdriver. A card inside and a diagram on the cover will tell you the right fuses to check. They also have relays. Those are located behind the fuses, but not sure how to check them. Hope it is a fuse.

Jan 13, 2010 | 2001 Volkswagen Passat

4 Answers

Problems with door locks and window


page 3-39 in owners manual. automatic door locks. do the steps and change too lock 2. this worked on my 2006 colorado crew cab. good luck

Apr 05, 2009 | 2005 Chevrolet Colorado

1 Answer

1999 Buick Century - passenger side power window does not work


Replace the Driver side window switch. These have a corrosion issue.

Mar 27, 2009 | 1999 Buick Century

2 Answers

VW Polo 2001 - Electric Windows wont open from Drivers side..


I removed all 3 switches from driver and passenger door, which is really easy with a flat head screw driver. took them completely apart, very carefully, with a small screwdriver out of a christmas cracker. put them back together again and 2 switches started working, so I put 1 in the drivers side and 1 in the passengers side so now my drivers door window opens and I lean over to open the passenger door. cool, no money spent...yet ;o)

Mar 25, 2009 | 2001 Volkswagen Golf

1 Answer

Power window not working


it sounds by the motor clicking that your power window motor is shot.....If you jump 12 volts to the terminals on the motor does it work?.................if it does you can at least get it up.......if you put the power to it and it goes down reverse the wires on the terminals and it will go up.But it sounds to me like you need a new one.
hope this helps!..............Good luck!

Jan 11, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

4 Answers

2004 Jeep Grand Cherokee driver side power windows do not work


I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Nov 25, 2008 | 2004 Jeep Grand Cherokee

4 Answers

Power windows


Under the dash next to the steering columb there is a control module for the power windows. this has a series of relays inside. Toggle the switch on one of the doors with the power on and you should hear a clicking noise coming from the box. If no noise, check relays and fuses under the hood near battery before replacing the control module.

Sep 01, 2008 | 1997 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1992 Honda Civic Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...