Question about Ford F

Open Question

Reply to auto-gen@fixya.com

Dear James,

Thank you very much for responding to my e-mail so promptly. The details of the van are:

  1. Make/Model/Type: Ford Transit 330 MWB TD
  2. Cylinder Capacity: 2402CC
  3. Type of Fuel: Heavy Oil
  4. Vehicle Category: N1
Please e-mail me a diagram of location of a Starter Motor on this van and instractions on how to replace it.

Kind Regards,
Lena

Posted by on

  • Anonymous May 12, 2009

    1997 Cadillac D Elegance fan motor keeps running, when igintion switch is turn off

×

2 Suggested Answers

  • 1 Answer

SOURCE: Diagram of Location of a Starter Motor on Ford Transit 2002/2003

replaced starter motor 53 plate t350 90 transit van. lots of dust replaced fly wheel and clutch and sensor :speed up to 50 miles per hour and temp gauge goes up and cuts power

Posted on Dec 08, 2008

  • 1 Answer

SOURCE: Diagram of Location of a Starter Motor on Ford Transit 2002/2003

i have a 2001y reg transit tipper and i think the starter motor is going when i go to start it like grinds then some times it starts perfect

Posted on Jan 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 fusion 2 oil warning light fuse where is it if there is one??


James I have in the recent past drove my car up to advance autos and they will plug in a computer for your car free of charge so you will positively know what is wrong. It may be the sending unit that screws into your engine block. I'll give you a link so you may locate one nearby: Advance Auto Parts Car Engine Batteries Brakes Replacement Performance... Thank you and best of luck. Please leave feedback.

Jul 13, 2016 | 2004 Ford Fusion

2 Answers

Do you have in stock front berings for a 2002 Ford Explorer


I've been through several wheel bearings on my 00 Ranger; they are a known issue with these model years. The best source for me has been a Florida-based outfit called Auto Parts Direct To You. http://www.apdty.com Here is a link to the 2002 Ford Explorer wheel bearing selector based on your Explorer's specs.
Select 2002 Ford Explorer Engine

Note that Ford was inconsistent with the type of assemblies they put into these model year vehicles; I found that out the hard way by ordering online. You might want to give these guys a call and be sure you're getting the right bearing for your vehicle. I've found them to be extremely knowledgeable and helpful, and the big plus is the lifetime warranty they provide on wheel bearings... a huge bennie for Ford truck owners!

Dec 16, 2014 | 2002 Ford Explorer

1 Answer

What type of power steering fluid should i buy? 1987 ford econoline van.


Hi, Go to a auto parts store and tell them the year and model of your van. They will give you the right stuff to buy. Good luck

Aug 02, 2011 | 1987 Ford Econoline

1 Answer

Need a diagram for my 95 ford econoline e250 5.8 engine


What type of diagram? If you go to an auto parts store, ask for a CHILTON'S book for your vehicle. They will need the year, make and model. This will have any and all diagrams needed.
Thank you,
carsandcomps,
Guru, Premium Expert @ Fixya.com

May 27, 2011 | Ford E-250 Cars & Trucks

2 Answers

Was there a recall on the windstar van 2002


Welcome to FIxYa.com




Yes there isleedavidian_217.jpg

Fuel related- speed sensor and Seat to latch recall



Thank you for using FixYa.com

Regards, Lee Davidian

Jan 02, 2011 | Ford Windstar Cars & Trucks

1 Answer

1987 Ford ECONOLINE VAN


You can google 87 Econoline Van Vacuum lines diagram and you'll find a site that will give it to you for free. If you don't find it purchase a Haynes manual from your local auto parts store.

May 29, 2009 | 1987 Ford Econoline

1 Answer

Car wont start


the strater is draging or your selonod is no good'' take it off''' The strater and have it chex-ed by a auto parts store and go from their'' my names is james you can e-mail me back at jay_win2002@yahoo.com .

Jan 30, 2009 | 1999 Ford Taurus

1 Answer

Replacement bolts for ford e-350 5.8 litre van


The best place to go would most likely be your local for dealership's parts and service dept. Granted, most auto parts stores tend to stock these bolts, but from time to time, I've found that they're not an exace match for the original factory equipment. You can usually rest assured that when you go to the dealership, you'll probably be getting bolts that came out of the same batch that was used to build these vehicles at the factor, ending the worry of wrong-sized bolts and cheap steel. Not only that, we're talking about a few bolts, so you shouldn't have to worry about it costing very much. Hope this proves to be useful and have a great night!

James

Nov 25, 2008 | 2002 Ford E350

2 Answers

Fuse for rear wiper blade 1995 ford windstar van gl


The rear wiper fuse number is 24 in the passenger compartment fuse box.

Nov 04, 2008 | 1995 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...