- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's a '99 Elantra, have you ever replaced the timing belt? It is a belt not a chaing, so it is very much should have the belt changed. After 13 years if you haven't done the belt yet now appears to be the time to change. I have an '05 and we changed it over a year now.
Except Matrix: Turn crankshaft one turn clockwise.
Matrix: Turn crankshaft two turns clockwise.
Ensure timing marks aligned  .
Apply a load of 2 kg to belt at .Belt should deflect 4-6 mm. If not Adjust position of tensioner pulley.
Install components in reverse order of removal.
Tighten crankshaft pulley bolt  . Tightening torque: 170-180 Nm
(7) is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
(6) is crank timing mark,pin mark on crank lines up with markS on block.
Installation Ensure timing marks aligned  &  . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt  . Push tensioner pulley firmly against timing belt to tension belt. 3. Tighten tensioner pulley bolt  . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6. Ensure timing marks aligned  . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9. Tighten crankshaft pulley bolt  . Tightening torque: 170-180 Nm
7 is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
6 is crank timing mark,pin mark on crank lines up with mark on block
NOTE this mark is just before top
If you are not very mechanically inclined, timing belt removal and replacement is best left to a professional because misplacement of the crank and cam gear positions can cause the engine to run poorly or even cause damage upon starting the engine.
What are you talking about?.. I presume you are replacing the Timing Belt or are reinstalling it OR you want to VERIFY if the engine is in ACCURATE time? There are TWO timing MARKS.. one on the CRANKSHAFT & other on the CAM SPROCKET.
Maybe this will help.
This is with Crankshaft at TOP DEAD CENTER.
Do you mean the "Timing Belt"? There is NO Cam belt.. .there is, however, a "Cam Timing Chain"... connects the Intake & Exhaust cams together under the cam cover (valve cover). Unless you actually INSPECT the Timing Belt, no one can know... the noise might be anything! Valve tappets, timing belt Idler pully, tensioner pully, water pump bearing, you name it. Solution: Take vehicle into Hyundai Service Center - pay the diagnostic fee - they will give you an estimate of repairs (if needed) (parts, labor, tax, time-frame, etc.). This way you'll know if there's actually a problem and what it is, as well as what's required to fix it... OR that there's nothing at all wrong.