Question about 2002 Dodge Durango

1 Answer

Brake lights my brake lights not working new brake lightswitch

Posted by on

  • 2 more comments 
  • kboswell04 Dec 01, 2008

    brake lights will not work, changed brake light switch, still nothing

  • ijwitham Dec 08, 2008

    I've checked all fuses. Used a test light to check old switch. Replaced switch and still no brake lights... HELP!

  • scottmel Feb 01, 2009

    Same problem, all bulbs good, installed new brake light switch and still no brake lights? No fuses blown nor are any really labeled for brake lights? When I pull the breaker in the fuse box under the hood labeled Interior lamp it kills the Interior lamp, front marker lights, rear marker lights, tail lights and blinkers? All lights work fine, just no brake lights (X3)? Any suggestions??????????

  • Anonymous Feb 28, 2009

    all bulbs good, installed new brake light switch and still no brake lights? No fuses blown nor are any really labeled for brake lights? When I pull the breaker in the fuse box under the hood labeled Interior lamp it kills the Interior lamp, front marker lights, rear marker lights, tail lights and blinkers? All lights work fine, just no brake lights (X3)? Any suggestions??????????

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

Check the multi switch power runs through this.(switch is the one that also cont. the turn signals

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia brake lights


Is there power to the brake light switch?

Mar 19, 2014 | 2002 Kia Optima

1 Answer

Brake lights wont work


check switch on brake pedal

Mar 17, 2014 | 1994 Buick Century

1 Answer

Parking brake light stays on


There is a switch on the parking brake handle or foot pedal,witch ever it has,this is more than likely the problem.

Oct 05, 2013 | 1986 Toyota Corolla

1 Answer

85 corvette tail lights don't work


Well its an 85 to begin with . Lot s of these vehicles are kept in garages most of the time but still rust never sleeps . You say that the brake and blinkers work thats a good sign . What you need to out is witch lights control the running lights .I mean are they a seperate light or work in conjuntion with the blinkers .In witch case a bad connection at the bulb or a burned out bulb could cause this . But hte most likely cause is a broken ground wire to the lights or a bad ground witch would go to the frame . Try looking under it and pull on ground wires and see if it starts to work they would be black wires and go to the frame or body And you will have to remove the screws that hold the lens in and the assmbely houseing to get a good look at it . Its a bad ground or bad light bulb

May 19, 2012 | Chevrolet Corvette Cars & Trucks

1 Answer

Brake and tail lights out


Im not sure if i understand exactly what you mean .You are saying that the brake lights and the tail lights don't work. But the first thing i would check would be the brake switch. Witch is located on the top of the brake pedel . Its like a light switch in your house its on or off and also most of the time has an ajustment that you could turn a nut if its not touching between the master cylinder rod and the pedel that you are pushing with your foot when you hit the brakes. If the switch is bad witch isn't uncommon its an inexpensive part about 10 dollars . And you need to remove a clip that holds a pin that slides through the upper part of the brake pedel then the switch will come out and is easly replaced ; But test it first like i said its like a light switch its on or off theres no half way and its likely your problem

Apr 08, 2012 | 1997 Pontiac Trans Sport

1 Answer

ABS light and car stays in low gear


In your car be the either one of wheel speed sensor or brake light switch faulty must need to be fix diagnose tool to find witch one is the faulty your car have electronic stability program working together with ABS brake bit complicated system many sensors are there can't say witch one is the faulty without diagnose.

Oct 04, 2010 | 2002 Mercedes-Benz C-Class

1 Answer

My flasher work but brake light not work just roof lighting went aply brake


Chk. fuse, emergency flashers, and middle break light, and the other break lights are on seperate curcit (a fuse for each), if fuse is ok than it could be break light switch, witch is located under dash on steering colume and works off break peddel arm.

Mar 28, 2009 | 1998 Chevrolet Blazer

Not finding what you are looking for?
2002 Dodge Durango Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...