Question about 2003 Jeep Grand Cherokee
After driving 10 miles at 55 then slowing to 25 engine light blinks,engine losses power. I pull over shut off the engine, check the codes 300, 301, 306, 442, 456. Turn it back on. Everything is fine again.
I would start with a test drive with a fuel pressure gauge on it make sure you have spec. 35 - 40 psi. Clear codes and record all the freeze frame data in obd2 as you will need this in the diag process. 442 and 456 are evap codes I believe, do they return with the 300 misfire codes? Either way you need to reproduce the problem with the gauge on it and get the first code it sets. Could be fuel pump/filter/sending unit assy. In this case you will need to pay attention to the fuel level when this occurs. (same level as before)
Posted on Nov 24, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 06, 2016 | Cars & Trucks
Jan 30, 2015 | 2005 Subaru Outback
Aug 24, 2014 | Cars & Trucks
Dec 21, 2012 | Cars & Trucks
The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.
Sep 25, 2012 | Cars & Trucks
Oct 09, 2010 | 2004 Nissan Sentra
May 19, 2010 | Cars & Trucks
Feb 04, 2010 | 1994 Honda Accord
253 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: