Question about 1988 Ford Mustang

Open Question

Mustang Clock wiring

I have a 94-98 Ford Mustang Cobra GT Dash Clock I want to install
in a different vehicle. I just need the wiring info. Thanks

Posted by on

6 Suggested Answers

emissionwiz
  • 61168 Answers

SOURCE: speed sensor removal 94 Mustang GT

Remove the trans cross member and let the trans drop down (use a floor jack), then you will be able to access it.

Posted on Sep 23, 2008

emissionwiz
  • 61168 Answers

SOURCE: digital clock

Here is a wiring diagram of the radio by wire color:

Radio Constant 12V+ Wire: Green/Yellow
Radio Switched 12V+ Wire: Yellow/Black
Radio Ground Wire: Black/Green
Radio Illumination Wire: Light Blue/Red
Radio Dimmer Wire: n/a
Radio Antenna Trigger Wire: Blue
Radio Amp Trigger Wire: Blue (Same as Antenna Trigger)
Front Speakers Size and Location: 5′ x 7′ Doors
Left Front Speaker Wire (+): Orange/Light Green
Left Front Speaker Wire (-): Light Blue/White
Right Front Speaker Wire (+): White/Light Green
Right Front Speaker Wire (-): Dark Green/Orange
Rear Speakers SIze and Location: 5′ x 7′ Rear Deck
Left Rear Speaker Wire (+): Gray/Light Blue
Left Rear Speaker Wire (-): Tan/Yellow
Right Rear Speaker Wire (+): Orange/Red
Right Rear Speaker Wire (-): Brown/Pink
-->

Posted on Oct 21, 2008

bunnydawg
  • 5158 Answers

SOURCE: Need engine wiring diagram for Ford Mustang 95 cobra 302 engine

http://www.veryuseful.com/mustang/tech/engine/

Posted on Mar 07, 2009

chuck943
  • 783 Answers

SOURCE: fuse box diagram

http://www.genuineservice.com/genuineservice/en/default?page=genuineService

Go to this website and pick owner guide on left task bar. Input your info and then pick owner guides.Your fuse information will begin on page 118.

Posted on Mar 15, 2009

  • 31 Answers

SOURCE: engine temperature sensor located on a 1998 Ford Mustang GT

Left hand side (if facing it), behind distributor, above oil fill.

Posted on Apr 22, 2009

tneubauer
  • 437 Answers

SOURCE: A diagram of a 2003 Ford Mustang interior fuse box?

Fuse Box Diagram

Circuit Schematic

I trust that these are what you are looking for, they are screen captures of the requested information right from Ford.

Posted on Jun 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mustang wiring diagrams


First check the light switch and brake switch. Under driver side is the rear light harness. Go to advance auto get a HAYES REPAIR MANUAL for mustang for that year I think they are all the same.

Jun 17, 2014 | 1999 Ford Mustang Cobra

1 Answer

How to change spark plugs and wires on 1998 Ford Mustang (not gt or cobra)


just replace one sparkplug and wire at a time. this way all will be ok!! GOOD DAY!!

Jun 17, 2011 | 1998 Ford Mustang

1 Answer

Does anyone know where i can find a fuseblock diagram ?


BJB (battery junction block) is under the hood
CJB (central junction block) is under the dash drivers side

Mar 20, 2010 | 1999 Ford Mustang Cobra

1 Answer

Putting a 302 in a 99 mustang


You'll need the K-member from a 94'-95' v6 or GT, along with the correct motor mounts. once you have that it should drop right in. But there are many more parts you'll need to make it work like a 5.0 tranny, exhaust, wiring, pcm, radiator, and maybe more. Look in the Ford Racing catalog and drop a 4.6L Cobra motor in there. A lot fewer parts to buy. Also if your state has car inspections the 5.0 is not OBDII, and should only be attempted if its going to be a "race only" car.

Jan 08, 2010 | 1999 Ford Mustang Cobra

1 Answer

Yes i was wondering can i swap out a 2003 ford mustang cobra motor and put it in a 1993 Lincoln Mark Vlll they both have the same engine 4.6L 32v 4cams just mustang cobra has a supercharger so i was...


can it be done? Yes. is it easy? No. While the basic design of the engine is the same, they are completely different. The cobra in 2003, had different heads, intake and rotating assembly. Also the 03 cobra is an ODBII vehicle while your 93 model is ODBI. i have seen several mark viii's that retained the stock engine, but bolted on the cobra intake. It requires some modifications but is relatively straight forward. hit up some of the mark viii forums, they pictures and in depth discussions on how the swaps are done.

Dec 26, 2009 | 1993 Lincoln Mark VIII

1 Answer

The plug is different then the wires ,


should be the same if your talking about the coil on plug.

Aug 14, 2009 | 1998 Ford Mustang

1 Answer

Dashlights not working-97 mustang gt


sound like a lose wire.take dash back out and check the wires that goes to dash.wires could have move out of place when you removed the dash.

May 26, 2009 | 1997 Ford Mustang Cobra

2 Answers

Signal light so fast


Try replacing the flasher unit.

Dec 16, 2008 | 1999 Ford Mustang Cobra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...