- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1998 honda accord v6 fully loaded 191 k on it and my dash lights stop working and the lights where my ac control as well stoped too ,, i turn on the head lights an there no lights in the dash nor the ac contrlos what is it
Your 1991 model Accord has automatic front retracting shoulder belts and, more than likely, the power retractor motor has gone bad on the passenger side front. If the shoulder seat belt is not in the retracted position, up close against the seat, when the car is running, the seat belt light will stay lit on your dash. Have the seat belt motor inspected and replaced if necessary.
the tail lights? theres two signals. is it the park lights stay on or the stop lights stay on??? is your stop lights stay on, go under the dash board right in front or behind the brake pedal you will see a switch. dicconect it. then check the lights again. if there off buy a new stop light switch and reinstall it. and recheck it again. also before you buy it, check the relay for the stop lights too. remove it and check. then put another from another function. huh horn, headligh a/c blower just to test it then put it back,. let me know
Hi,
Usually there is a spring loaded switch that is activated by the brake pedal arm (under the dash). It registers on the pedal arm and when the pedal is depressed the switch is activated, causing your brake lights to illuminate.
The switch may have been bumped out of position. Hopefully this is a quick and easy fix for you...
Good luck!
Bad solders in DRL relay located left side of steering column below change drawer behind dash. It will be indicated with a stamp DAYTIME RUNNING LIGHT RELAY. Remove it and redo the solders to the relay contacts in the unit. This will fix the DRL light in dash, return the DRL system to functioning and will also fix headlight not working problem.
×