- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well, grampus, (as one to another) since nobody gave you any help yet...your best bet would be to get a Haynes or Chilton manual for your vehicle and check out the procedure for replacing a heater core. It can get pretty involved, and time consuming. Hopefully there is an access door for easy removal of the core. But on some, you have to first remove the heater case to get at the core-very tedious job. The actual procedure for your car will be necessary. Good luck, Alphonso. And merry Christmas.
the heater core is located behind your dashboard on the fire wall. you will have to remove the dashboard and components blocking you from getting to the heater core it is a very aggravating job but can be done with patience and will save you alot of money to do it your self
you have a heater core leak. If you start seeing coolant on the passenger side floor, that is another dead giveaway. This is not any easy replacement, you will have to remove the entire dashboard. Heater cores are pretty cheap though, the last one i bought was for a dodge, it was $35.00. I hope this helps.
This is definitely not a job for the at home mechanic. the dash will probably have to come out and this is a very time consuming and laborious task. I would recommend you find a job that you can trust, or get several estimates on the work before you decide who to let do the work. I would expect something like this to run at least $700.00 to $1000.00
mark & crimp heater lines in engine bay locate blower box you may have to remove the dash to get to it the bolts should be on the side the center at the console and on top by defrost vents
open blower box pull core out be sure to mark all parts when removeing